Connectors

20 Position Receptacle Connector 0.100" (2.54mm) Through Hole Tin The SSW-120-01-T-S is a single-row, 20-position female (receptacle) socket strip with a 2.54 mm (0.1") pitch, intended for through-hole PCB mounting. It uses Samtec’s Tiger Buy™ contact system, providing reliable electrical performance and durability for repeated mating cycles. It is commonly used in embedded systems, development boards, and general PCB interconnections, especially where standard 0.1" headers are required. Female header 1x20 2.54mm Key Features Standard 2.54 mm Pitch Industry-standard spacing compatible with most pin headers and prototyping systems 20 Positions, Single Row Ideal for compact signal connections and header interfaces Tiger Buy™ Contact System Provides low insertion force and reliable electrical contact Available in standard or low insertion force variants Through-Hole Mounting Ensures strong mechanical retention and durability on PCBs Tin-Plated Contacts (T option) Cost-effective plating suitable for general-purpose applications High-Speed Capability Supports signals up to ~8 Gbps, depending on application and layout Wide Operating Temperature Range Typically −55 °C to +105 °C, suitable for industrial environments Material Construction Contacts: Phosphor bronze Insulator: High-temperature plastic (e.g., LCP) Versatile Mating Compatibility Mates with common Samtec header series (TSW, MTSW, etc.) and standard 0.025" square posts #CommonPartsLibrary #Connector #SSW-120

Connector Header Through Hole 6 position 0.100" (2.54mm) The TSW-103-07-G-D is a through-hole, dual-row (2×3) male pin header from the TSW series of Samtec. It is designed for board-to-board or cable-to-board interconnections, using a standard 2.54 mm (0.1″) pitch, making it widely compatible with common PCB layouts and prototyping systems. This connector features gold-plated square posts for reliable electrical contact and durability, and is commonly used in embedded systems, development boards, and general electronics applications. Key Features Connector Type: Male pin header (unshrouded) Number of Positions: 6 pins (2 rows × 3 pins) Pitch: 2.54 mm (0.100″) standard spacing Mounting Type: Through-hole soldering Contact System: 0.025″ (0.635 mm) square post Contact Material: Phosphor bronze with gold plating Orientation: Vertical (straight) Row Spacing: 2.54 mm Operating Temperature: −55 °C to +125 °C Insulator Material: PBT (UL94 V-0 rated) Typical Use: Board-to-board or cable interface AVR ISP 2x3 2.54mm header #commonpartslibrary #connector #header

16 Position Header Connector 0.100" (2.54mm) Through Hole, Right Angle Gold The PPPC082LJBN-RC is a dual-row, right-angle pin header connector intended for through-hole PCB mounting. It uses a standard 2.54 mm pitch with a 2×8 pin configuration and is commonly used for board-to-board or board-to-cable connections. The connector provides stable mechanical support and reliable electrical performance, making it suitable for prototyping, embedded systems, and general-purpose electronic designs. Mechanical Specifications Connector Type: Pin Header Mounting Type: Through-Hole, Right Angle Number of Positions: 16 (2×8) Pitch: 2.54 mm Row Spacing: 2.54 mm Contact Orientation: Right Angle Termination Style: Solder Housing Material: Thermoplastic (UL94V-0 rated) Contact Material: Brass Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically 250 V Contact Resistance: ≤ 20 mΩ Insulation Resistance: ≥ 1000 MΩ Dielectric Withstanding Voltage: ~500 VAC Environmental Specifications Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94V-0 RoHS Compliance: Yes Plating Contact Plating: Gold flash over nickel (typical) Tail Plating: Tin over nickel Applications PCB interconnections Embedded systems and microcontroller boards Industrial control interfaces Consumer electronics prototyping Signal and low-power connections Mating Compatibility Compatible with standard 2.54 mm pitch female headers and IDC connectors #commonpartslibrary #connector #header

16 Position Receptacle Connector 0.100" (2.54mm) Through Hole, Right Angle Tin The SSQ-108-02-T-D-RA is a dual-row, right-angle female socket connector manufactured by Samtec. It is designed for board-to-board or wire-to-board interconnections in through-hole mounting applications. This connector features a 2.54 mm pitch with high-reliability contact systems, making it suitable for prototyping, embedded systems, and industrial electronics. The right-angle configuration enables horizontal mating, optimizing space in compact PCB layouts. Key Features Dual-row female socket strip Right-angle orientation for horizontal mating Standard 2.54 mm pitch spacing Through-hole mounting for secure PCB attachment High-reliability phosphor bronze contacts Gold-plated contact area for improved conductivity and corrosion resistance Black thermoplastic housing (UL94V-0 rated) Mechanical Specifications Number of Positions: 16 (2 × 8 configuration) Pitch: 2.54 mm Row Spacing: 2.54 mm Mounting Type: Through-hole Orientation: Right-angle Contact Type: Female socket Mating Post Length Compatibility: Standard 0.64 mm square posts Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically up to 500 VAC Contact Resistance: Low contact resistance for signal integrity Insulation Resistance: High insulation resistance Material Specifications Contact Material: Phosphor bronze Contact Plating: Gold over nickel Housing Material: Thermoplastic (UL94V-0 compliant) Environmental Specifications Operating Temperature Range: Suitable for industrial temperature ranges RoHS Compliant: Yes Lead-Free: Yes Applications PCB interconnect systems Embedded and control systems Prototyping and development boards Industrial and consumer electronics #commonpartslibrary #connector

Dip Switch SPST 2 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-2LPSTJ is a two-position pluggable terminal block connector designed for secure wire-to-board connections in industrial and commercial electronic applications. It features a screw-clamp termination mechanism, allowing reliable and reusable connections for solid or stranded wires. The connector is typically used in power distribution, control systems, and signal wiring where ease of maintenance and field wiring is required. Key Features Pluggable terminal block, two positions Screw-clamp wire termination for secure connection Standard pitch suitable for common PCB layouts Removable plug for easy installation and maintenance Designed for solid and stranded wire compatibility High reliability for industrial environments Mechanical Specifications Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole (header) with mating plug Wire Entry: Side entry Wire Gauge Range: Typically 24 AWG to 12 AWG (manufacturer dependent) Housing Material: High-temperature thermoplastic Color: Typically green Electrical Specifications Rated Voltage: Up to 300 V (UL rating typical) Rated Current: Up to 10–15 A (depending on wire size and conditions) Contact Resistance: Low resistance, suitable for power and signal transmission Insulation Resistance: High insulation resistance under standard conditions Environmental Specifications Operating Temperature Range: −40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Power supply connections Industrial control systems HVAC equipment Automation and instrumentation PCB-based terminal interfaces Mating / Compatibility Compatible with corresponding 2-position pluggable terminal block headers with 5.08 mm pitch Designed for repeated mating cycles without degradation #commonpartslibrary #switch #dip #spst

Connector Header Surface Mount, Right Angle 15 position 0.049" (1.25mm) The 0532611571 is a wire-to-board crimp housing connector manufactured by Molex, belonging to the Mini-Lock series. It is designed for compact, high-reliability connections in power and signal applications. This connector supports secure mating with corresponding headers and is commonly used in consumer electronics, industrial equipment, and automotive systems where space-saving and reliable contact are required. Key Features Compact wire-to-board connector system Positive locking mechanism for secure mating Designed for crimp terminal insertion Suitable for both power and signal transmission Polarized housing to prevent misalignment Friction lock for retention stability Mechanical Characteristics Number of positions: 15 Pitch: 2.50 mm Mounting type: Free-hanging (in-line) Contact termination: Crimp Housing material: Thermoplastic (UL-rated) Color: Natural (typical) Electrical Characteristics Rated voltage: Up to 250 V Current rating: Up to 3 A per contact (dependent on wire gauge and terminals used) Contact resistance: Low resistance design for reliable conduction Insulation resistance: High insulation performance Environmental Characteristics Operating temperature range: -40°C to +105°C RoHS compliant Suitable for standard environmental conditions in electronic assemblies Compatible Components Mating headers: Molex Mini-Lock series headers (2.50 mm pitch) Crimp terminals: Molex Mini-Lock crimp terminals (e.g., 50212 series) Applications Consumer electronics Industrial control systems Automotive electronics Power distribution within compact devices #commonpartslibrary #connector

Connector Header Through Hole 3 position 0.098" (2.50mm)

Connector Header Through Hole, Right Angle 10 position 0.100" (2.54mm) The 1761607-3 is a pluggable terminal block connector manufactured by TE Connectivity. It is designed for reliable wire-to-board connections in industrial and electronic applications. The connector supports screw-clamp termination, allowing secure and reusable wire connections. Its modular design enables easy installation and maintenance, making it suitable for control systems, power distribution, and signal interfacing. Key Features Pluggable terminal block connector Screw-clamp wire termination Reliable mechanical and electrical connection Modular and field-serviceable design Suitable for industrial environments Electrical Characteristics Rated voltage: up to 300 V (typical, application dependent) Rated current: up to 8 A (depending on wire size and conditions) Contact resistance: low contact resistance for stable conductivity Insulation resistance: high insulation resistance Mechanical Characteristics Number of positions: 3 Pitch: 3.5 mm Termination type: screw clamp Wire size range: typically 26 AWG to 16 AWG Mounting type: through-hole PCB Mating type: pluggable header interface Material Properties Housing material: high-temperature thermoplastic Contact material: copper alloy Contact plating: tin plating Flammability rating: UL94 V-0 Environmental Specifications Operating temperature range: −40°C to +105°C RoHS compliant Suitable for industrial applications Applications Industrial control systems Power supply connections Signal interface modules Automation equipment HVAC and building control systems Compliance & Standards RoHS compliant UL recognized (application dependent) IEC standard compliant terminal block design #commonpartslibrary #connector #header

Connector Header Through Hole 22 position 0.100" (2.54mm) PinHeader_1x22_P2.54mm_Vertical General Description The TSW-122-07-G-S is a through-hole vertical pin header manufactured by Samtec. It is part of the TSW series, designed for board-to-board or wire-to-board interconnections. This component features a single-row configuration with standard 2.54 mm pitch spacing, making it widely compatible with common prototyping and production PCB designs. It is commonly used in embedded systems, development boards, and general-purpose electronic assemblies requiring reliable and cost-effective connectivity. Key Features Single-row vertical pin header Through-hole mounting style Standard 2.54 mm pitch spacing Tin-plated contacts for reliable electrical connection Black thermoplastic insulator housing Designed for board-to-board or cable interfacing Compatible with standard mating connectors and sockets Electrical Characteristics Current rating suitable for signal-level and low-power applications Contact resistance designed for stable electrical performance Insulation resistance suitable for typical PCB environments Mechanical Characteristics Number of positions: twenty-two Row configuration: single row Mounting type: through-hole Orientation: vertical Contact material: copper alloy Contact plating: tin Housing material: high-temperature thermoplastic Environmental Characteristics Operating temperature range suitable for industrial and commercial electronics RoHS compliant Designed for durability under normal handling and soldering conditions Applications Microcontroller and development boards Prototyping platforms Board-to-board interconnections Embedded systems General electronic assemblies #commonpartslibrary #connector #header