Connectors

Connector Header Through Hole 26 position 0.100" (2.54mm) The 827881-1 is a TE Connectivity board-to-board / wire-to-board connector component (AMP series header/socket depending on configuration) designed for reliable electrical interconnection in compact electronic assemblies. It is commonly used in industrial, automotive, and consumer electronic applications where stable signal or power transmission between PCBs or wiring harnesses is required. Key Features Manufacturer: TE Connectivity (AMP) Connector Type: PCB header / receptacle (depends on mating part) Contact Arrangement: Multi-position (varies by variant) Mounting Style: Through-hole or board mount (variant dependent) Contact Material: High-reliability copper alloy with plating for corrosion resistance Current Rating: Suitable for signal-level and moderate power applications (varies by configuration) Voltage Rating: Designed for standard low-voltage electronic systems Durability: High mating cycle life for repeated connections Polarization: Mechanical keying to prevent mismating Locking Feature: Secure retention for vibration resistance Application Areas: Industrial control boards Automotive electronics Communication modules Embedded systems and PCB interconnects #CommonPartsLibrary #Connector

WR-PHD 2.54 mm Pin Header 12 pins, 1 row, straight, gold plating Connector Header Through Hole 12 position 0.100" (2.54mm) Ang 61301211121 ay isang vertical through-hole male pin header connector mula sa Würth Elektronik under ng WR-PHD series. Ito ay isang 12-position, 2.54 mm pitch unshrouded header na karaniwang ginagamit para sa board-to-board at wire-to-board connections sa embedded at industrial electronics. Key Features 12-position single-row male pin header 2.54 mm (0.1") standard pitch Through-hole vertical mounting Gold-plated copper alloy contacts Unshrouded design 3 A current rating 250 V voltage rating UL94 V-0 flame-retardant housing Operating temperature: −40 °C to +105 °C Compatible for board-to-board or cable interconnect applications Solder termination type #CommonPartsLibrary #Connector

4 Position Wire to Board Terminal Block Vertical with Board 0.197" (5.00mm) Through Hole The WAGO 2604-3104 is a through-hole PCB terminal block designed for secure wire-to-board power and signal connections in industrial and commercial electronic equipment. It features WAGO Push-in CAGE CLAMP® spring connection technology with integrated lever actuation, allowing fast, tool-free wire insertion and removal. The connector is intended for reliable field wiring applications where vibration resistance, ease of maintenance, and compact PCB integration are required. Engineering Specification Manufacturer: WAGO Manufacturer Part Number: 2604-3104 Product Family: PCB Terminal Block Series: 2604 Connector Type: Wire-to-Board Terminal Block Mounting Style: Through-Hole PCB Mount Orientation: Vertical / Top Entry Number of Positions: 4 Pitch Spacing: 5.00 mm Connection Technology: Push-in CAGE CLAMP® Actuation Method: Lever Operated Wire Size Range: 24 AWG to 12 AWG Supported Conductors: Solid, stranded, and ferruled wires Rated Voltage: Up to 400 V IEC, 300 V UL Rated Current: Up to 32 A IEC, 20 A UL Operating Temperature Range: -60°C to +105°C Insulation Material: Polyamide PA66 Contact Material: Electrolytic Copper Contact Plating: Tin-Plated Spring Material: Chrome Nickel Spring Steel Flammability Rating: UL94 V-0 Color: Gray housing with orange lever PCB Contact Type: THT solder pins Application Areas: Industrial controls, power distribution, automation systems, instrumentation, and general PCB power interconnects. #commonpartslibrary #connector #terminalblock

Connector Header Through Hole 22 position 0.100" (2.54mm) Pin Header 02x22 2.54mm Vertical The 77313-118-22LF is a 2.54 mm pitch unshrouded vertical pin header connector from the Amphenol ICC (FCI) BergStik® series. It is designed for board-to-board and wire-to-board interconnections in embedded systems, industrial electronics, prototyping, and general PCB applications. The connector features a double-row, 22-position through-hole configuration with gold-plated phosphor bronze contacts for reliable electrical performance and durability. Key Features 22-position dual-row header 2.54 mm (0.100") pitch Vertical through-hole mounting Unshrouded male pin header BergStik® series Gold-plated contacts for improved conductivity and corrosion resistance Phosphor bronze contacts with thermoplastic housing Current rating: up to 3 A per contact Operating temperature: −65°C to +130°C UL94 V-0 flame-rated housing RoHS compliant Suitable for: MCU and development boards Mezzanine board stacking Ribbon cable interfaces General-purpose PCB interconnects #CommonPartsLibrary #Connector #Header

I-PEX MHF4 Connector Receptacle, Male Pin 50 Ohms Surface Mount Solder The 20449-001E-03 is an ultra-miniature MHF4 RF coaxial receptacle connector from I-PEX designed for high-frequency wireless applications such as Wi-Fi, Bluetooth, LTE, GNSS, and cellular antenna connections in compact electronic devices. It is a surface-mount RF connector optimized for miniature coaxial cable assemblies and high-density PCB layouts. Key Features Ultra-small MHF4 RF coaxial receptacle Supports frequencies up to 9 GHz Characteristic impedance: 50 Ω Surface-mount (SMT) PCB mounting Snap-on mating mechanism Compact footprint for space-constrained designs Gold-plated center contact for improved conductivity and corrosion resistance Uses: MHF4 compatible RF cables and antenna assemblies High-reliability micro RF interconnect Operating temperature: −40°C to +90°C Rated voltage: 60 V Approximate mating cycle rating: 30 cycles Constructed with: Brass contacts LCP (Liquid Crystal Polymer) dielectric material RoHS compliant Typical Applications Wi-Fi modules LTE/5G modules GNSS/GPS antennas Bluetooth devices IoT devices Embedded wireless systems Compact handheld electronics RF communication modules

19 Position Header Connector 0.100" (2.54mm) Through Hole Tin 1x19 pin header 2.54mm This component is a single-row female header connector designed for general-purpose board-to-board and wire-to-board interconnections. It provides a reliable and cost-effective solution for standard pitch connectivity in electronic assemblies. The connector is commonly used in prototyping, development boards, and production systems where modular connections and ease of assembly are required. Its design supports compatibility with standard male pin headers, making it suitable for a wide range of applications in industrial, consumer, and embedded electronics. Key Features The connector features a single-row configuration with standard pitch spacing, enabling compatibility with widely used pin header systems. It is constructed with durable insulating material and conductive contacts that provide stable electrical performance. The contacts are designed to ensure consistent mating force and reliable signal transmission. The component supports through-hole mounting for strong mechanical retention and ease of soldering. Its construction allows repeated mating cycles while maintaining contact integrity. Electrical Characteristics The connector is designed to support typical signal and low-power applications in electronic circuits. It provides consistent electrical contact with low contact resistance and stable conductivity under normal operating conditions. The materials and plating are selected to ensure reliable performance over time, minimizing oxidation and degradation during use. Mechanical and Material Characteristics The housing is made from a high-temperature thermoplastic material suitable for standard soldering processes. The contacts are formed from conductive metal alloy and finished with a protective plating to enhance durability and conductivity. The connector is designed for vertical mounting orientation and aligns with standard printed circuit board layouts for through-hole components. Thermal Characteristics The component is suitable for typical operating temperature ranges encountered in electronic assemblies. The housing material is resistant to heat generated during soldering and normal operation, ensuring structural integrity and long-term reliability. Applications This connector is widely used in embedded systems, development platforms, consumer electronics, industrial control systems, and communication equipment. It is ideal for applications requiring modular connectivity, easy replacement, and reliable electrical interfacing between boards or components. Compliance and Standards The component is manufactured in accordance with industry standards for electronic connectors and is suitable for use in systems requiring dependable mechanical and electrical performance. It supports common environmental and material compliance requirements for modern electronic manufacturing. #commonpartslibrary #connector #header

50 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold Hirose