Analog Devices

QFN-68-EP(7x7) Power Management - Specialized RoHS The RK809-5 is a highly integrated Power Management Integrated Circuit (PMIC) from Rockchip designed for multi-core processor systems and embedded applications. It provides a complete power management solution by integrating multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, battery fuel gauging, RTC functionality, and audio codec capabilities into a single device. The RK809-5 is commonly used alongside Rockchip SoCs in single-board computers, tablets, AIoT devices, and industrial embedded systems. Key Features Five high-efficiency synchronous buck converters with fast transient response. Nine low-dropout (LDO) voltage regulators for powering sensitive analog and digital circuits. Integrated battery fuel gauge for battery capacity monitoring. Configurable power-up and power-down sequencing (OTP programmable). Dynamic Voltage Scaling (DVS/DVFS) support via I²C interface. Integrated Real-Time Clock (RTC) with 32.768 kHz crystal oscillator support. Two integrated load switches for peripheral power control. Over-current, over-voltage, and thermal protection features. Built-in audio CODEC with headphone driver and Class-D amplifier support. Designed to minimize external component count and simplify power system design. QFN-68-EP (7 mm × 7 mm) package. #RK8095 #RK809 #Rockchip #PMIC #PowerManagementIC #BatteryManagement #AudioCodec #RTC #DVFS #EmbeddedSystems #SingleBoardComputer #IoT #IndustrialElectronics #PowerSupplyDesign #ElectronicsEngineering

3 Channel AFE 24 Bit 28-WQFN (5x5) ADS1293CISQ/NOPB is a highly integrated, low-power 3-channel ECG Analog Front-End (AFE) from Texas Instruments. It is designed for portable and battery-powered medical devices, fitness monitors, heart-rate monitoring systems, Holter monitors, and other electrocardiogram (ECG) applications. The device integrates signal acquisition, filtering, lead-off detection, right-leg drive generation, and high-resolution analog-to-digital conversion into a single IC, reducing external component count and system cost. Key Features Three high-resolution ECG acquisition channels 24-bit analog-to-digital conversion Simultaneous pace detection support Ultra-low power consumption of approximately 0.3 mW per channel Low input-referred noise of 7 µVpp (40 Hz bandwidth) Programmable sample rates up to 25.6 ksps Differential input voltage range of ±400 mV Integrated EMI-hardened input filters Flexible input routing matrix Built-in Right-Leg Drive (RLD) amplifier AC and DC lead-off detection Integrated Wilson and Goldberger terminal generation Battery voltage monitoring capability Internal oscillator and voltage reference ALARMB pin for interrupt-driven diagnostics and fault reporting Multiple power-down and standby modes for battery-powered systems SPI-compatible digital interface Operating temperature range: –20°C to +85°C 28-pin WQFN package (5 mm × 5 mm) Typical Applications Portable 1-, 3-, 5-, 6-, 7-, 8-, and 12-lead ECG systems Holter monitors Event recorders Telemedicine devices Patient vital-sign monitoring equipment Automated External Defibrillators (AEDs) Sports and fitness heart-rate monitors Wearable medical devices Hashtags #commonpartslibrary #integratedcircuit #TexasInstruments #ADS1293 #AFE #AnalogFrontEnd #ECG #Electrocardiogram #MedicalElectronics #HealthTech #WearableDevices #HeartRateMonitor #PatientMonitoring #BiomedicalEngineering #24BitADC #LowPowerDesign #SPI #SignalConditioning #PortableMedicalDevices #HolterMonitor #Telemedicine #VitalSignsMonitoring #EmbeddedSystems #MixedSignalIC #WQFN28 #BatteryPoweredDevices #MedicalInstrumentation

Clock Generators, PLLs, Frequency Synthesizers ADF4351BCPZ LFCSP-32_L5.0-W5.0-P0.50-BL-EP3.5 LCSC Part Number: C654681 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/LINEAR(凌特) Analog Devices ADF4351 wideband fractional-N and integer-N PLL frequency synthesizer with integrated voltage-controlled oscillator (VCO), generating RF output frequencies from 35MHz to 4.4GHz. Features low phase noise, programmable output divider ratios (/1, /2, /4, /8, /16, /32, /64), programmable RF output power, dual-modulus prescaler (4/5 or 8/9), analog and digital lock detect, fast lock mode, cycle slip reduction, auxiliary RF output, RF mute function, and 3-wire serial programming interface. Operates from 3.0V to 3.6V and is widely used in RF signal generators, local oscillators, SDR systems, wireless infrastructure, test equipment, microwave communications, clock generation, and laboratory instrumentation. Search Keywords: ADF4351, Analog Devices ADF4351, ADF4351BRUZ, RF synthesizer, PLL synthesizer, fractional N PLL, integer N PLL, integrated VCO, 35MHz to 4.4GHz synthesizer, RF signal generator IC, microwave frequency synthesizer, local oscillator PLL, SDR synthesizer, programmable RF generator, low phase noise synthesizer, SPI PLL synthesizer, RF clock generator Hashtags: #ADF4351 #AnalogDevices #PLL #FractionalNPLL #IntegerNPLL #FrequencySynthesizer #RFSynthesizer #IntegratedVCO #RFGenerator #SignalGenerator #LocalOscillator #MicrowaveRF #SDR #ClockGenerator #RFIC #WirelessInfrastructure #TestEquipment #LowPhaseNoise #SPIInterface #ADF4351Module

ADC, Audio 32 b 7.35k ~ 768k I2C, I2S, TDM 20-WQFN (3x3) The TLV320ADC3120IRTER is a low-power, high-performance stereo audio analog-to-digital converter designed for voice, audio capture, and digital signal processing applications. The device integrates programmable microphone bias generation, low-noise input amplifiers, digital filtering, automatic gain control, and high-resolution audio conversion into a compact package. It supports a wide range of analog microphone and line-level input configurations while delivering excellent audio fidelity and power efficiency. The converter is optimized for portable electronics, smart devices, industrial audio systems, communication equipment, and embedded voice-processing applications requiring high-quality audio digitization. Engineering Specifications Manufacturer: Texas Instruments Part Number: TLV320ADC3120IRTER Device Type: Stereo Audio Analog-to-Digital Converter Audio Channels: Stereo Input Architecture Converter Type: Sigma-Delta Analog-to-Digital Converter Resolution: High-Resolution Audio Conversion Input Configuration: Differential and Single-Ended Inputs Microphone Support: Integrated Microphone Bias Generation Programmable Gain: Integrated Low-Noise Programmable Gain Amplifiers Digital Processing: Integrated Digital Filters Automatic Gain Control: Supported Audio Interface: Digital Audio Serial Interface Power Consumption: Low Power Operation Clocking Support: Flexible Audio Clock Configuration Noise Performance: Low Noise Audio Acquisition Dynamic Range: High Dynamic Range Package Type: WQFN Package Mounting Style: Surface Mount Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Voice Capture Systems, Smart Speakers, Audio Recording Equipment, Industrial Audio Devices, Communication Systems, Embedded Audio Platforms, Human Machine Interfaces, Portable Electronics Key Features High-performance stereo audio conversion Integrated microphone bias circuitry Low-noise programmable gain amplifiers Automatic gain control functionality Flexible digital audio interface support Optimized for voice and audio capture applications Low power consumption for portable devices Integrated digital signal processing features High audio fidelity and dynamic range Compact surface-mount package for space-constrained designs #TLV320ADC3120IRTER #TexasInstruments #AudioADC #AudioConverter #StereoADC #DigitalAudio #VoiceCapture #AudioProcessing #EmbeddedAudio #MicrophoneInterface #AudioElectronics #DSP #IndustrialElectronics #SmartDevices #PortableElectronics #SignalProcessing #SurfaceMount #ElectronicComponents #PCBDesign #AudioSystemDesign

Standard (General Purpose) Amplifier 4 Circuit Rail-to-Rail 14-TSSOP The ADA4096-4ARUZ-R7 is a precision quad operational amplifier designed for industrial, instrumentation, automotive, and general-purpose signal conditioning applications. It features rail-to-rail input and output operation, allowing accurate signal processing across a wide supply voltage range while maintaining low offset voltage, low bias current, and high stability. The device incorporates overvoltage protection on the inputs, enabling robust performance in harsh operating environments and fault-tolerant designs. Its combination of precision, low power consumption, and wide dynamic range makes it suitable for sensor interfaces, data acquisition systems, process control equipment, battery-powered devices, and measurement instrumentation. Engineering Specifications Manufacturer: Analog Devices Part Number: ADA4096-4ARUZ-R7 Device Type: Precision Operational Amplifier Amplifier Configuration: Quad Input Stage: Rail-to-Rail Output Stage: Rail-to-Rail Supply Voltage Range: Wide Operating Range Input Overvoltage Protection: Integrated Input Bias Current: Low Input Offset Voltage: Low Noise Performance: Low Noise Operation Gain Bandwidth Product: Optimized for Precision Signal Conditioning Slew Rate: Suitable for General-Purpose Analog Applications Power Consumption: Low Power Package Type: Thin Shrink Small Outline Package Mounting Style: Surface Mount Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Sensor Interfaces, Data Acquisition Systems, Industrial Control, Instrumentation, Medical Electronics, Process Monitoring, Battery-Powered Equipment, Analog Signal Conditioning Key Features Rail-to-rail input and output architecture Input overvoltage protection for enhanced robustness Low offset voltage for precision measurements Low bias current for high-impedance sensor applications Stable operation across a wide supply range Suitable for single-supply and dual-supply designs Optimized for industrial and instrumentation environments #ADA4096 #ADA40964ARUZR7 #AnalogDevices #OperationalAmplifier #OpAmp #PrecisionAmplifier #RailToRail #SignalConditioning #InstrumentationAmplifier #IndustrialElectronics #DataAcquisition #SensorInterface #AnalogDesign #PCBDesign #EmbeddedSystems #SurfaceMount #LowPowerElectronics #ElectronicComponents

Temperature Sensors DS18B20+T&R TO-92-3_L4.9-W3.7-P2.54-L LCSC Part Number: C880672 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/MAXIM(美信) DS18B20+T&R programmable resolution 1-Wire digital temperature sensor, local temperature measurement from -55°C to +125°C, 12-bit resolution, ±0.5°C accuracy from -10°C to +85°C, unique 64-bit serial code for multidrop 1-Wire networks, parasite power mode support, user-programmable alarm thresholds, TO-92-3 through-hole package, supplied in tape and reel packaging. Search Keywords: DS18B20+T&R, DS18B20+TR, DS18B20, Analog Devices DS18B20, Maxim DS18B20, 1-Wire temperature sensor, digital temperature sensor TO-92, DS18B20 TO-92-3, 12-bit temperature sensor, -55C to 125C temperature sensor, parasite power temperature sensor Hashtags: #DS18B20 #DS18B20TR #DS18B20TandR #AnalogDevicesDS18B20 #MaximDS18B20 #TemperatureSensor #DigitalTemperatureSensor #1WireSensor #12BitSensor #TO923 #ParasitePowerSensor

Direct Digital Synthesis (DDS) AD5933YRSZ SSOP-16_L6.2-W5.3-P0.65-LS7.8-BL LCSC Part Number: C578324 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺) Analog Devices AD5933 high-precision impedance converter and network analyzer IC, combines on-board frequency generator with 12-bit 1MSPS ADC and DSP-based DFT processing, programmable excitation voltage up to 100kHz, 27-bit frequency resolution below 0.1Hz, impedance measurement range from 1kΩ to 10MΩ, supports phase and magnitude measurement, internal temperature sensor with ±2°C accuracy, internal system clock option, I2C serial interface, 2.7V to 5.5V supply voltage range, -40°C to +125°C temperature range, 16-lead SSOP package. Search Keywords: AD5933, Analog Devices AD5933, AD5933 impedance converter, AD5933 network analyzer, 12-bit impedance converter, 1MSPS impedance analyzer, impedance measurement IC, complex impedance analyzer, bioelectrical impedance IC, I2C impedance analyzer, AD5933 100kHz, AD5933 SSOP-16, AD5933 datasheet Hashtags: #AD5933 #AnalogDevicesAD5933 #ImpedanceConverter #NetworkAnalyzerIC #ImpedanceAnalyzer #12BitADC #1MSPSADC #BioelectricalImpedance #ComplexImpedanceMeasurement #I2CInterface #100kHzFrequencyGenerator #SSOP16

MAX30003CTI+ QFN-28_L5.0-W5.0-P0.50-TL-EP3.3 LCSC Part Number: C1519515 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/MAXIM(美信) Analog Devices MAX30003 ultra-low-power single-channel integrated biopotential ECG analog front-end (AFE), designed for wearable ECG and heart-rate applications, includes high-resolution ECG data converter, R-to-R detection, ESD protection, EMI filtering, internal lead biasing, DC leads-off detection, right-leg drive, programmable gain, anti-aliasing filter and calibration functions, 15.5-bit effective resolution with 5µVP-P noise, high CMRR over 100dB, high input impedance over 500MΩ, 85µW power consumption at 1.1V supply, leads-on interrupt and heart-rate interrupt functions, available in 28-pin TQFN and 30-bump WLP packages. Search Keywords: MAX30003, Analog Devices MAX30003, Maxim MAX30003, MAX30003 ECG AFE, MAX30003 biopotential AFE, MAX30003 ECG front end, single channel ECG AFE, wearable ECG AFE, R-to-R detection AFE, heart rate ECG sensor IC, low power ECG IC, biopotential analog front end, MAX30003 TQFN-28, MAX30003 WLP-30, MAX30003 datasheet Hashtags: #MAX30003 #AnalogDevicesMAX30003 #MaximMAX30003 #ECGAFE #BiopotentialAFE #ECGFrontEnd #SingleChannelECG #WearableECG #HeartRateAFE #RtoRDetection #LowPowerECG #AnalogFrontEnd #MedicalSensorIC #BiopotentialSensor #HighCMRR #TQFN28 #WLP30

The ESP32-DevKitC is an official ESP32-based development board from Espressif Systems designed for rapid prototyping and IoT application development. It integrates an ESP32 module (such as ESP32-WROOM-32E or ESP32-WROVER variants), USB-to-UART programming interface, power regulation circuitry, reset and boot buttons, and access to most ESP32 GPIOs through dual-row headers. The board is breadboard-friendly and supports wireless connectivity, making it suitable for smart devices, industrial monitoring, home automation, wearable electronics, and embedded control systems. Key Features ESP32 Dual-Core Processor Xtensa® 32-bit LX6 dual-core MCU Up to 240 MHz clock frequency High-performance embedded processing capability. Wireless Connectivity Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth Classic (BR/EDR) and Bluetooth Low Energy (BLE) support. Memory Typically includes 4 MB SPI Flash Some variants provide additional PSRAM for memory-intensive applications. Rich Peripheral Interfaces UART, SPI, I²C, I²S, SDIO ADC and DAC PWM outputs Capacitive touch sensing Pulse counter and timer peripherals. Extensive GPIO Access Most ESP32 pins are broken out to headers Supports digital I/O, interrupts, analog inputs, and communication interfaces. Development-Friendly Hardware USB-to-UART bridge for programming and debugging Dedicated EN (Reset) and BOOT buttons On-board 3.3 V regulator Breadboard-compatible layout. Flexible Power Options Powered through Micro-USB and onboard power circuitry Supports external power connections through header pins. #DevelopmentBoard

133MHz LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHS RP2040 The RP2040 is a high-performance, low-cost 32-bit microcontroller developed by Raspberry Pi Ltd.. It features dual ARM Cortex-M0+ processor cores, flexible digital interfaces, and a unique Programmable I/O (PIO) subsystem that enables custom hardware protocols and timing-critical applications. The device is widely used in embedded systems, IoT devices, robotics, industrial control, consumer electronics, and educational projects. Key Features Dual ARM Cortex-M0+ CPU cores operating up to 133 MHz (up to 200 MHz under specific conditions) 264 KB on-chip SRAM organized in six independent memory banks External QSPI Flash interface with Execute-In-Place (XIP) support and up to 16 MB Flash memory capability 30 multifunction GPIO pins with extensive peripheral multiplexing 2 × UART interfaces 2 × SPI controllers 2 × I²C controllers 16 PWM channels for motor control and signal generation USB 1.1 Host and Device support with integrated PHY 12-bit ADC with four external analog inputs and internal temperature sensor, up to 500 ksps sampling rate 12-channel DMA controller for efficient data transfers Programmable I/O (PIO) subsystem with 8 state machines for implementing custom communication interfaces and precise timing applications Integrated PLLs and programmable LDO regulator for clock and power management Operating voltage range: 1.8 V to 3.3 V Available in a compact 7 mm × 7 mm QFN-56 package Typical Applications IoT and connected devices Industrial automation Robotics and motor control Human-machine interfaces (HMI) Consumer electronics USB peripherals Sensor data acquisition systems Educational and maker projects Custom communication protocol implementations using PIO #CommonPartsLibrary #IntegratedCircuit #Microcontroller