Resistors

Power Supply Controller Digital Power Monitor 10-VSSOP The INA228 is an ultra-precise digital power monitor with a 20-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84 mV or ±40.96 mV across a resistive shunt sense element with common-mode voltage support from –0.3 V to +85 V. The INA228 reports current, bus voltage, temperature, power, energy and charge accumulation while employing a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature. The low offset and gain drift design of the INA228 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in mA to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger currentsense resistors, thus providing accurate current measurements in the micro-amp range. The device allows for selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data. • High-resolution, 20-bit delta-sigma ADC • Current monitoring accuracy: – Offset voltage: ±1 µV (maximum) – Offset drift: ±0.01 µV/°C (maximum) – Gain error: ±0.05% (maximum) – Gain error drift: ±20 ppm/°C (maximum) – Common mode rejection: 154 dB (minimum) • Power monitoring accuracy: – 0.5% full scale, –40°C to +125°C (maximum) • Energy and charge accuracy: – 1.0% full scale (maximum) • Fast alert response: 75 μs • Wide common-mode range: –0.3 V to +85 V • Bus voltage sense input: 0 V to 85 V • Shunt full-scale differential range: ±163.84 mV / ±40.96 mV • Input bias current: 2.5 nA (maximum) • Temperature sensor: ±1°C (maximum at 25°C) • Programmable resistor temperature compensation • Programmable conversion time and averaging • 2.94-MHz high-speed I2C interface with 16 pinselectable addresses • Operates from a 2.7-V to 5.5-V supply: – Operational current: 640 µA (typical) – Shutdown current: 5 µA (maximum) #CommonPartsLibrary #IntegratedCircuit #PowerManagement

USB-to-UART Bridge CP2102N-A02-GQFN24 is a highly integrated USB-to-UART bridge controller from Silicon Labs. It provides a simple and cost-effective way to add USB connectivity to embedded systems by converting USB 2.0 Full-Speed communication into a standard UART interface. The device integrates the USB transceiver, oscillator, voltage regulator, and UART controller, minimizing external components and eliminating the need for USB firmware development. It is commonly used in microcontroller programming interfaces, industrial equipment, POS terminals, data loggers, and USB-to-serial adapters. Key Features USB 2.0 Full-Speed compliant (12 Mbps) interface. USB-to-UART bridge with data rates up to 3 Mbaud. Integrated USB transceiver; no external USB resistors required. Integrated oscillator; no external crystal required. On-chip 3.3 V voltage regulator. USB Battery Charger Detection (BC 1.2) support. Remote wakeup capability from USB suspend state. Low operating current of approximately 9.5 mA. Hardware and software flow control support. Internal configurable ROM for Vendor ID, Product ID, serial number, and USB descriptors. Royalty-free Virtual COM Port (VCP) drivers available for major operating systems. Operating temperature range: −40°C to +85°C. Compact 24-pin QFN (4 mm × 4 mm) package. Typical Applications USB-to-Serial adapters Microcontroller programming and debugging interfaces Industrial automation equipment Point-of-sale (POS) terminals Medical instruments Data acquisition and logging systems Embedded systems requiring USB connectivity #commonpartslibrary #integratedcircuit

Current Sense Resistors/Shunt Resistors HoLR0603-1/3W-10mR-1% RES-SMD_L1.6-W0.8_RCP0603W LCSC Part Number: C2912659 JLCPCB Part Class: Extended Part Manufactured by Milliohm(毫欧) 10 mOhms ±1% 3W Chip Resistor Wide 2512 (6432 Metric), 1225 Automotive AEC-Q200, Current Sense Thin Film

Current Sense Amplifier 1 Circuit 8-SOIC The INA240A1D is a precision current-sense amplifier manufactured by Texas Instruments, specifically designed for high-side and low-side current measurement applications in electrically noisy environments. The device features enhanced PWM rejection capability, enabling accurate current sensing in motor control systems, switching power supplies, solenoid drivers, and other fast-switching power electronics applications. The amplifier is optimized for measuring voltage drops across shunt resistors while maintaining high common-mode voltage tolerance and excellent signal accuracy. Its bidirectional current-sensing capability allows monitoring of charging and discharging currents in battery systems and power management circuits. The INA240A1D provides fixed gain amplification and high common-mode transient immunity, making it suitable for industrial automation, automotive electronics, embedded power systems, and precision current monitoring applications. The device combines low offset voltage, low drift characteristics, and robust analog performance within a compact surface-mount package, simplifying precision current measurement implementation in modern electronic systems. Engineering Specification Device Type Current-sense amplifier Amplifier Configuration Precision bidirectional current-shunt monitor Input Characteristics High common-mode voltage sensing capability Gain Configuration Fixed-gain current measurement amplifier Measurement Topology High-side and low-side current sensing support Signal Performance High accuracy with low offset voltage and low drift PWM Rejection Enhanced PWM rejection for switching power applications Common-Mode Performance High common-mode transient immunity Output Characteristics Analog voltage output proportional to sensed current Power Consumption Low-power precision analog operation Package Type SOIC surface-mount package Mounting Style Surface mount technology Protection and Reliability Designed for robust operation in electrically noisy environments Applications Motor control systems Battery management systems Switching power supplies Industrial automation Current monitoring Solenoid control Power inverters Embedded power electronics Automotive current sensing Load measurement systems Manufacturer Texas Instruments #commonpartslibrary #currentsenseamplifier #analogfrontend #powermanagement #texasinstruments #motorcontrol #currentsensing #embeddedhardware #industrialelectronics #analogdesign #surfaceountcomponents #powerelectronics #signalconditioning #batterymanagement #precisionanalog

HoJLR2512-3W-5mR-1% is a low-resistance current sense resistor designed for high-power current measurement and power monitoring applications in embedded and industrial electronic systems. Constructed using precision metal alloy resistive material, the component provides stable resistance characteristics, low temperature coefficient, and high current handling capability for accurate current sensing under demanding operating conditions. This resistor is optimized for use in power management circuits, battery monitoring systems, motor control applications, DC-DC converters, automotive electronics, and industrial power distribution platforms. Its low resistance value minimizes power loss while enabling precise current measurement when used with amplifiers, ADCs, or dedicated current sensing circuitry. The HoJLR2512-3W-5mR-1% features a compact surface-mount package suitable for automated PCB assembly and high-density layouts. Its robust thermal performance and precision tolerance characteristics make it suitable for high-efficiency power systems requiring reliable current monitoring and overload detection functionality. #commonpartslibrary #currentsenseresistor #shuntresistor #powermanagement #passivecomponents #embeddedhardware #powersupply #industrialelectronics #surfacemountdevice #electronicscomponents