Oscillators
An oscillator is an electronic circuit that generates a periodic, oscillating signal, often a sine wave or a square wave. Oscillators are used in a wide range of applications, including clocks, radios, and sound synthesis. Flux.ai has the world's largest community-driven public library of oscillators, with footprints, symbols, datasheets, and simulation models. This comprehensive resource allows engineers and designers to easily find the oscillator they need for their specific application and use it with confidence. Whether you are working on a simple clock circuit or a complex radio transmitter, Flux.ai's oscillator library has you covered. So, if you are in need of an oscillator for your next project, be sure to check out Flux.ai's extensive collection.
CP2105-F01-GMR
USB-to-dual-UART bridge controller with integrated USB transceiver, oscillator, voltage regulator, and configurable GPIO/handshake functions. Supports USB 2.0 Full-Speed (12 Mbps), dual UART interfaces with baud rates up to 2 Mbps, 1.8 V to VDD I/O, and self-powered operation from 3.0–3.6 V. Suitable for USB-to-serial interfaces, embedded systems, industrial controllers, and RS-485 applications. #USBToUART #UART #USB2.0 #InterfaceIC #SerialCommunication #SiliconLabs
90 Uses0 StarsPIC18F56Q24-I/PT
PIC PIC® XLP™ 18K Microcontroller IC 8-Bit 64MHz 64KB (64K x 8) FLASH 48-TQFP (7x7) 8-bit Microcontroller (MCU) featuring a 64 MHz internal oscillator, 64 KB Flash program memory, 4 KB SRAM, and 512 B EEPROM. The PIC18F56Q24-I/PT provides 43 I/O pins, 10-bit 300 ksps ADC with Computation, Multi-Voltage I/O (MVIO), DMA, PWM, UART, SPI, and I²C interfaces, making it suitable for sensor interfacing, real-time control, and embedded communication applications. Operates from 1.8 V to 5.5 V and is housed in a 48-pin TQFP package for industrial-temperature operation (-40°C to +85°C). #Microcontroller #MCU #PIC18 #Microchip #Embedded #ADC #MVIO #SPI #I2C #UART #PWM
0 Uses0 StarsHT16K33A-28SSOP
SSOP-28 Display Drivers HT16K33A-28SSOP is a RAM-mapped, multi-function LED controller/driver IC with an I²C interface, supporting up to 128 display points in a 16×8 configuration and up to 13×3 matrix key scanning. It operates from 4.5–5.5 V, includes an internal RC oscillator and 16-step dimming control, and is suitable for LED displays, digital instruments, clocks, counters, and control panels in a 28-pin SSOP package. #HOLTEK #HT16K33A #LEDDriver #LEDController #I2C #Keyscan #DisplayDriver #SSOP28
8 Uses0 StarsSTDCRA3-8M
8 MHz SMD Crystal Unit – Fundamental-mode quartz crystal used as a frequency reference for microcontrollers, embedded systems, communication devices, and digital circuits. The NDK STDCRA3-8M has an 8 MHz nominal frequency, ±50 ppm frequency tolerance, ±150 ppm frequency stability over temperature, 8 pF load capacitance, and 500 Ω maximum equivalent resistance. It operates from −40°C to +150°C and uses a compact 2-SMD package (3.2 × 2.5 mm). #NDK #STDCRA38M #Crystal #QuartzCrystal #8MHz #FrequencyReference #SMD #Oscillator #EmbeddedSystems #Microcontroller
2 Uses0 StarsCX2016SA38400H0FRNC1
38.4 MHz Quartz Crystal – Fundamental-mode crystal resonator for frequency generation and timing applications. The KYOCERA AVX CX2016SA38400H0FRNC1 has a 38.4 MHz nominal frequency, 12 pF load capacitance, ±10 ppm frequency tolerance, ±25 ppm frequency temperature characteristic over −40°C to +105°C, and 60 Ω maximum ESR. It uses a compact 2.0 × 1.6 mm surface-mount package and operates from −40°C to +105°C. #KYOCERAAVX #CX2016SA38400H0FRNC1 #QuartzCrystal #CrystalResonator #384MHz #TimingComponent #FrequencyControl #SMD #Oscillator #PCBComponents
0 Uses0 Stars