Microcontrollers
A microcontroller is a small, low-cost computer-on-a-chip that can be used to control electronic devices and systems. It consists of a central processing unit (CPU), memory, input/output (I/O) ports, and other peripherals integrated onto a single chip. Microcontrollers are commonly used in a wide range of applications, including automotive systems, home appliances, industrial automation, and consumer electronics. One of the key benefits of microcontrollers is their ability to interact with their environment through sensors and actuators, making them well-suited for use in embedded systems. These systems are often found in devices that require real-time control or data processing, such as medical equipment, aircraft, and factory automation systems. Flux.ai is home to the world's largest community-driven public library of microcontrollers, with footprints, symbols, datasheets, and simulation models for a wide range of devices. Whether you're a professional engineer looking for a specific microcontroller for your next project, or a hobbyist exploring the possibilities of microcontroller-based systems, Flux.ai has the resources you need to get started.
SE051C2HQ1/Z01XDZ
IoT Secure Element with EdgeLock® SE051 Security Technology – Hardware-based secure element IC designed for IoT security, connected devices, industrial automation, smart home systems, automotive applications, cloud authentication, and embedded cybersecurity solutions. Provides a tamper-resistant secure environment for cryptographic key storage, device identity protection, secure authentication, and trusted communication. Features Common Criteria EAL5+ certified secure hardware, EdgeLock® secure architecture, ECC and RSA cryptographic support, AES encryption/decryption, SHA-2 hashing, HMAC, True Random Number Generator (TRNG), secure key generation, and secure object storage for protecting sensitive credentials and certificates. Supports I²C communication interface with host microcontrollers and is compatible with secure cloud platforms and IoT provisioning workflows. Operates from a 1.71 V to 3.6 V supply, supports −40°C to +105°C industrial temperature operation, and is housed in a compact 20-HX2QFN (3 × 3 mm) surface-mount package. #NXP #SE051C2HQ1Z01XDZ #EdgeLockSE051 #SecureElement #IoTSecurity #HardwareSecurity #Cryptography #SecureAuthentication #AES #ECC #RSA #TRNG #IndustrialIoT #EmbeddedSystems
3 Uses0 StarsESP32-S3-PICO-1-N8R2
Wi-Fi® 4 + Bluetooth® 5 LE System-in-Package (SiP) MCU – Highly integrated 2.4 GHz wireless System-in-Package (SiP) featuring an ESP32-S3 dual-core Xtensa® LX7 microcontroller for IoT devices, smart home products, AIoT, edge computing, industrial automation, HMI, wearable devices, and embedded wireless applications. Operates at up to 240 MHz with 8 MB embedded Flash and 2 MB embedded PSRAM, eliminating the need for external memory and reducing PCB size. Supports Wi-Fi 802.11 b/g/n and Bluetooth® 5 LE (including Long Range and 2 Mbps PHY), with up to +20 dBm transmit power and 150 Mbps Wi-Fi data rate. Features native USB 2.0 OTG, vector instructions for AI acceleration, 45 programmable GPIOs, SPI, I²C, I²S, UART, USB, RMT, LCD/Camera interface, PWM, TWAI® (CAN), ADC, touch sensing, AES-XTS, SHA, RSA, ECC, HMAC, secure boot, Flash encryption, and a true random number generator (TRNG) for secure embedded applications. Operates from a 3.0 V to 3.6 V supply, over a −40°C to +85°C temperature range, and is housed in a compact 56-pin QFN (7 × 7 mm) package. #EspressifSystems #ESP32S3PICO1N8R2 #ESP32S3 #WirelessMCU #SystemInPackage #WiFi #Bluetooth5LE #DualCore #XtensaLX7 #USBOTG #AIoT #EmbeddedSystems
2 Uses0 StarsPIC16LF19156-I_MV
PIC PIC® XLP™ 16F Microcontroller IC 8-Bit 32MHz 28KB (16K x 14) FLASH 28-UQFN (4x4) 8-bit PIC microcontroller for embedded control applications, operating from a 1.8 V to 3.6 V supply with a maximum CPU frequency of 32 MHz. It integrates 28 KB Flash, 2 KB RAM, 256 bytes EEPROM, a 12-bit ADC with up to 20 channels, 5-bit DAC, SPI, I²C, and EUSART interfaces, 24 GPIOs, LCD controller support, multiple timers, PWM, comparators, and Core Independent Peripherals in a 28-pin UQFN package. #Microcontroller #8BitMCU #PIC16LF19156 #Microchip #EmbeddedSystems #FlashMCU #LowPower #12BitADC #SPI #I2C #EUSART #PWM #LCDController #UQFN28 #PCBLibrary
0 Uses0 StarsBQ34210IPWRQ1
Battery Power Management IC Multi-Chemistry 14-TSSOP The bq34210-Q1 1-Series Cell System-Side CEDV Fuel Gauge provides fuel gauging and End-of-Service (EOS) Determination for 1-series cell batteries in applications that encounter infrequent discharge, such as eCall systems and uninterruptible power supplies (UPS) for backup during power failures, where batteries may stay connected to a charging power source most of their lifetime until needed. The bq34210-Q1 fuel gauge supports multiple battery chemistries, including Li-Ion, LiFePO4, and NiMH. The gas gauging function uses voltage, current, and temperature data along with Compensated End-ofDischarge (CEDV) technology to provide State-ofCharge (SOC) and State-of-Health (SOH) data. The device's EOS Determination function alerts when battery capability has degraded and is approaching the end of its usable service. Battery fuel gauging with the bq34210-Q1 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery management system. Features 1• Automotive-Qualified AEC-Q100, Grade 3 • 1-Series Cell Battery Fuel Gauge Supports Li-Ion, LiFePO4, and NiMH (3-Cell) Chemistries – Resides on System Board – Powers Directly from the Battery with Integrated LDO – Supports a Low-Value External Sense Resistor (10 mΩ) • Learning Load Enable (LEN) from Host • Ultra-Low Power Consumption in NORMAL (50 µA) and SLEEP (9 µA) Modes • Supports Replacement Batteries • Accurate End-of-Service (EOS) Determination for Batteries in Rarely Discharged Applications • CEDV Gas Gauge for 1-Series Cell Batteries, Providing: – State-of-Charge (SOC) – Time-to-Empty (TTE) – State-of-Health (SOH) • High-Side and Low-Side Current Sensing Options • Internal Temperature Sensor OR External Thermistor • Microcontroller Peripheral Interface Supports: – 400-kHz I 2C™ Serial Interface – Configurable Interrupt (ALERT) for SOC, Battery Levels, Temperature Faults, and Charge/Discharge Status 2 Applications • eCall Systems • Telematics Backup Systems • Uninterruptible Power Supply (UPS) Backup Systems • Emergency Battery Power Modules #BatteryFuelGauge #BatteryManagement #FuelGaugeIC #AutomotiveElectronics #TexasInstruments #LiIonBattery #LiFePO4 #I2C #PowerManagement #AECQ100 #BackupBattery #UPS #EmbeddedSystems
2 Uses0 Stars
