Interface ICs
An interface IC is a type of integrated circuit that is designed to facilitate communication between two devices or systems. These devices are commonly used in electronic systems to enable the transfer of data and control signals between different components or subsystems. Some common use cases for interface ICs include connecting microcontrollers to peripherals such as sensors or displays, linking multiple processors together in a network, and enabling communication between devices using different communication protocols. Flux.ai has the world's largest community-driven public library of interface ICs, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need access to accurate and up-to-date information on these important components. Whether you are working on a new design project or simply looking to learn more about interface ICs, Flux.ai is an excellent resource to help you find the information you need.
SE868K3-A
Telit SE868K3-A/AL GNSS antenna module, multi-constellation GPS/QZSS/GLONASS receiver with Galileo ready support, integrated 9x9mm patch antenna, SAW filter, LNA, flash memory, RTC and TCXO, 11x11mm SMT PCB package, supports UART/I2C/SPI interfaces, A-GPS ephemeris prediction/injection, SBAS compliant, simultaneous GPS+GLONASS/Galileo tracking, optimized RF path, low power consumption, backward compatible with SE868-A series. SE868K3
15 Uses0 Stars0533981271
Connector Header Surface Mount 12 position 0.049" (1.25mm) 53398-1271 The 0533981271 is a board-to-wire connector assembly component designed to provide a reliable electrical and mechanical interface between a printed circuit board and discrete wire harnesses. It belongs to a compact connector system intended for applications requiring secure mating, efficient signal transmission, and ease of assembly. The component is engineered to support consistent electrical contact performance while maintaining a small footprint suitable for space-constrained designs. Its construction ensures dependable connectivity under typical operating conditions encountered in consumer electronics, industrial equipment, and embedded systems. Functional Description This connector component serves as part of a modular interconnect system, enabling termination of wires and subsequent mating to a corresponding board-mounted header. It provides stable retention and alignment during mating and unmating operations, ensuring consistent electrical continuity. The design supports straightforward integration into automated or manual assembly processes, facilitating efficient production workflows. Contact geometry and housing features are optimized to maintain reliable engagement and minimize the risk of intermittent connections. Electrical Characteristics The component is designed to support low-voltage signal and power transmission in compact electronic systems. It provides low contact resistance to ensure efficient current flow and stable signal integrity. Insulation materials are selected to maintain dielectric performance and prevent leakage under normal operating conditions. The connector system is suitable for typical electronic applications where consistent and reliable electrical performance is required. Mechanical Characteristics The connector features a durable housing constructed from engineered thermoplastic material, providing mechanical strength and resistance to environmental stress. Contact elements are formed from conductive alloys and finished to enhance conductivity and corrosion resistance. The design includes features that promote secure mating retention and proper alignment, reducing wear and ensuring longevity over repeated use. Its compact form factor supports high-density layouts on printed circuit boards. Environmental Characteristics The component is designed to operate reliably within standard environmental conditions encountered in electronic equipment. Materials used in the housing and contacts are selected for thermal stability and resistance to common environmental factors such as humidity and mechanical vibration. The connector system maintains performance over typical temperature ranges associated with consumer and industrial applications. Applications This connector is intended for use in electronic systems requiring compact and reliable wire-to-board interconnection. Common applications include consumer devices, industrial control systems, embedded modules, and communication equipment where dependable signal or power connectivity is essential. Summary The 0533981271 from Molex is a compact and reliable connector solution for board-to-wire applications. It offers consistent electrical performance, robust mechanical design, and ease of integration, making it well suited for modern electronic assemblies requiring dependable interconnect solutions. #commonpartslibrary #connector #header
1 Uses0 StarsFUSB340TMX
USB Switch USB 3.1 USB Interface 18-TMLP (2x2.8) The FUSB340 is a 2:1 data switch for USB SuperSpeed Gen1 and Gen2, 5 Gbps and 10 Gbps data. It is targeted at the mobile device market and for use in Type−C applications where a reversible cable requires a switch. The FUSB340 data switch offers superior performance various high speed data transmission protocols: • USB 3.1 SuperSpeed (Gen 2), 10 Gbps • PCI Express, Gen 3 • SATA • Fibre Channel • Display Port 1.3 Features • 10 GHz Typical Bandwidth • USB 3.1 SuperSpeed 5 Gbps and10 Gbps Switch • −1.0 dB Typical Insertion Loss at 2.5 GHz • Low Active Power of 12 A Typical • Low Shutdown Power of < 1 A Max. • 2 kV HBM ESD Protection • Small Packaging, 18 Lead TMLP • Wide VDD Operating Range, 1.5 V−5.0 V • This is a Pb−Free Device #CommonPartsLibrary #IntegratedCircuit #Controller #FUSB340
15 Uses0 StarsRFFM6901
The RFFM6901 is a single-chip RF front-end module (FEM) designed for 868 MHz to 928 MHz ISM-band wireless communication applications. It integrates a high-power power amplifier (PA), low-noise amplifier (LNA), antenna diversity switch, and matching circuitry into a compact package, helping reduce external components, PCB space, and overall system cost. It is commonly used in smart energy systems, wireless metering, industrial monitoring, alarm systems, and other Sub-1 GHz wireless devices. Key Features Operating frequency range: 868 MHz to 928 MHz Integrated 1 W power amplifier Up to +30 dBm transmit output power Integrated low-noise amplifier with bypass mode Dual-port antenna diversity switch Separate 50 Ω transmit and receive interfaces Compact 32-pin LGA package (6 mm × 6 mm) Supply voltage range: 2.8 V to 4.2 V Typical LNA gain: 17 dB Low receiver noise figure: 1.5 dB Designed for portable and battery-powered wireless systems RoHS compliant Typical Applications Smart energy and smart metering Wireless alarm and security systems ISM-band communication devices Industrial wireless sensors Portable RF equipment IoT Sub-1 GHz wireless systems Search across more sources
2 Uses0 StarsPEC11J-9015F-S0024
Rotary Encoder Incremental 24 Quadrature (Incremental) User Selectable 10 mA @ 5 VDC,-10 C to +70 C The PEC11J-9015F-S0024 is a compact surface-mount incremental rotary encoder from the Bourns PEC11J series, designed for user interface applications requiring precise rotational input and long operational life. It features a quadrature output with 24 pulses per revolution and includes an integrated momentary push-button switch, making it suitable for menu navigation, volume control, tuning systems, and industrial control panels. Its rugged metal shaft construction and high durability make it reliable for both consumer and professional electronic equipment. Key Features Incremental rotary encoder with 2-bit quadrature output 24 pulses per revolution (24 PPR) resolution Integrated momentary push-button switch Surface-mount gull-wing terminals Compact 12 mm encoder body Durable metal shaft and bushing Long rotational life of up to 100,000 cycles No detents for smooth continuous rotation Supports up to 60 RPM operating speed Operating temperature range: -10 °C to +70 °C IP40 rated enclosure Flatted shaft design for secure knob attachment Suitable for: Audio equipment Lighting consoles Consumer appliances Communication devices Test and measurement equipment Component Category #Sensor #Encoder #Transducer #PEC11J
72 Uses0 StarsESP32-WROOM-32E (16MB)
The ESP32-WROOM-32E (16MB) is a highly integrated Wi-Fi + Bluetooth + Bluetooth Low Energy (BLE) module developed by Espressif. It is based on the ESP32-D0WD-V3 chip and features a dual-core processor, rich peripherals, and large flash memory—making it ideal for IoT, embedded systems, and wireless applications. This module is part of the upgraded WROOM-32E series, offering improved RF performance, better stability, and enhanced reliability compared to earlier versions like the 32D. Key Features (16MB Variant) Processor & Memory Dual-core Xtensa® 32-bit LX6 CPU, up to 240 MHz 520 KB SRAM + 448 KB ROM 16 MB SPI Flash (large storage for firmware/data) Optional variants with PSRAM for memory-intensive tasks Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth v4.2 (BR/EDR + BLE) Integrated PCB antenna (no external antenna needed) Peripherals & Interfaces Up to 26–38 GPIOs (depending on usage) Supports: UART, SPI, I2C, I2S PWM (LED & motor control) ADC, DAC Capacitive touch sensors SD/SDIO/MMC, CAN (TWAI) Electrical & Physical Operating voltage: 3.0V – 3.6V Operating temperature: –40°C to +85°C (industrial range) Compact size: 18 × 25.5 × 3.1 mm Typical Applications Smart home devices (lighting, appliances) IoT sensors and gateways Industrial automation systems Wearables and smart gadgets Audio/voice processing (thanks to dual-core + large flash) #module #ESP32 #16MB
70 Uses0 StarsTPD4E05U06DQAR
14VC Clamp 2.5A@8/20us Ipp TVS DIODE USON-10(1x2.5) The TPDxE05U06 is a family of unidirectional Transient Voltage Suppressor (TVS) based Electrostatic Discharge (ESD) protection diodes with ultra-low capacitance. Each device can dissipate ESD strikes above the maximum level specified by the IEC 61000-4-2 international standard. The TPDxE05U06s ultra-low loading capacitance makes it ideal for protecting any high-speed signal pins. Typical applications for TPDxE05U06 includes high speed signal lines in HDMI 1.4b, HDMI 2.0, USB 3.0, MHL, LVDS, DisplayPort, PCI-Express® , eSata, and V-by-One® HS. Features • IEC 61000-4-2 Level 4 ESD Protection – ±12-kV Contact Discharge – ±15-kV Air Gap Discharge • IEC 61000-4-4 EFT Protection – 80 A (5/50 ns) • IEC 61000-4-5 Surge Protection – 2.5 A (8/20 µs) • IO Capacitance 0.42 pF to 0.5 pF (Typical) • DC Breakdown Voltage 6.5 V (Minimum) • Ultra low Leakage Current 10 nA (Maximum) • Low ESD Clamping Voltage • Industrial Temperature Range: –40°C to +125°C • Easy Straight-Through Routing Packages Application • HDMI 1.4b • HDMI 2.0 • USB 3.0 • MHL • LVDS Interfaces • DisplayPort • PCI-Express® • eSata Interfaces • V-by-One® HS #Commonpartlibrary #TVS diode #Circuit Protection
238 Uses0 StarsTPS259530DSGR
Electronic Fuse Regulator 4A 8-WSON (2x2) The TPS259530DSGR is a compact, integrated eFuse protection device designed to provide robust power-path management for low-voltage DC systems, particularly nominal five-volt rails. It combines multiple protection and control features into a single solution, enabling safe distribution of power to downstream circuitry while minimizing the need for external components. The device supports controlled inrush current during startup, continuous current monitoring, and rapid fault response to protect both the power source and the load. Integrated protection mechanisms include overvoltage protection, undervoltage lockout, overcurrent limiting, thermal shutdown, and reverse current blocking. This makes the device well suited for applications requiring high reliability, such as embedded systems, industrial electronics, consumer devices, and communication equipment. Functional Description The device operates as a high-side protection switch using an internal MOSFET to control current flow from the input supply to the load. It monitors input voltage, output current, and internal temperature to ensure operation within safe limits. When a fault condition such as overcurrent or overvoltage is detected, the device limits or interrupts current flow to prevent damage. The integrated control loop provides smooth startup by limiting inrush current and preventing supply droop. Reverse current blocking prevents unwanted current flow from the output back to the input when the input supply is removed or drops below the output level. Electrical Characteristics The device supports operation across a wide input voltage range suitable for low-voltage DC systems, including typical five-volt rails. It features an adjustable overvoltage protection threshold aligned with five-volt system requirements, along with configurable undervoltage lockout to ensure proper system startup and shutdown behavior. The current limit is externally programmable, allowing flexibility for different load conditions. The device exhibits low on-resistance to minimize power dissipation and voltage drop during normal operation. Protection Features The TPS259530DSGR integrates multiple protection functions to enhance system robustness. Overvoltage protection prevents excessive input voltage from reaching the load. Undervoltage lockout ensures the device only operates when the input supply is within a valid range. Overcurrent protection actively limits current during fault conditions and can respond rapidly to short circuits. Thermal shutdown protects the device from overheating by disabling operation when internal temperature exceeds safe limits. Reverse current blocking prevents backflow of current, safeguarding both the source and load. Control and Interface The device includes an enable control input that allows external control of the power path. It supports configurable behavior for fault response and recovery, depending on system design. External components can be used to set thresholds such as current limit and undervoltage lockout, providing design flexibility. Status signaling allows system-level monitoring of fault conditions. Mechanical and Package Information The TPS259530DSGR is provided in a compact surface-mount package suitable for space-constrained applications. The package is optimized for thermal performance and efficient PCB layout, enabling reliable operation under varying load conditions. It is supplied in tape-and-reel format for automated assembly processes. Applications This device is intended for use in systems requiring reliable power distribution and protection. Typical applications include five-volt power rails in embedded systems, industrial control modules, consumer electronics, communication devices, and peripheral power management circuits. Summary The TPS259530DSGR offers an integrated, high-reliability solution for power path protection and management in low-voltage systems. Its combination of protection features, configurability, and compact form factor makes it a widely used choice for safeguarding five-volt supply rails in modern electronic designs. #commonpartslibrary #integratedcircuit #powermanagement
1.0k Uses0 Stars
