Interface ICs
An interface IC is a type of integrated circuit that is designed to facilitate communication between two devices or systems. These devices are commonly used in electronic systems to enable the transfer of data and control signals between different components or subsystems. Some common use cases for interface ICs include connecting microcontrollers to peripherals such as sensors or displays, linking multiple processors together in a network, and enabling communication between devices using different communication protocols. Flux.ai has the world's largest community-driven public library of interface ICs, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need access to accurate and up-to-date information on these important components. Whether you are working on a new design project or simply looking to learn more about interface ICs, Flux.ai is an excellent resource to help you find the information you need.
ST25DV04K-IER8C3
Dynamic NFC/RFID Tag IC – 4-Kbit EEPROM memory device with I²C and RF interfaces, supporting contactless communication according to ISO/IEC 15693 and NFC Forum Type 5. The ST25DV04K-IER8C3 operates from 1.8 V to 5.5 V, supports 13.56 MHz RF communication, and provides up to 512 bytes of user memory through the I²C interface. It also supports fast transfer mode and energy harvesting from the RF field. The device is housed in an 8-pin UFDFPN 2 × 3 mm package and operates from −40°C to +105°C. #STMicroelectronics #ST25DV04K #NFC #RFID #EEPROM #I2C #ISO15693 #NFCType5 #13_56MHz #EmbeddedSystems
0 Uses0 StarsMUSBA11130
Rugged USB Type-A Receptacle Connector – Right-angle, through-hole USB 2.0 connector designed for panel-mounted data and power interfaces in industrial and embedded systems. The Amphenol CS MUSBA11130 features 4 contacts, 1.5 A current rating, IP67 ingress protection, and 500 V AC RMS voltage rating. It has gold-plated contacts, a shielded nickel-plated zinc-alloy shell, a UL94 V-0 thermoplastic housing, and a −40°C to +105°C operating temperature range. Rated for 1,500 mating cycles. Amphenol +1 #Amphenol #MUSBA11130 #USBTypeA #USB20 #RuggedConnector #IP67 #ThroughHole #RightAngleConnector #PCBComponents #EmbeddedSystems
6 Uses0 Stars54602-908LF
RJ45 Modular Ethernet Jack – The Amphenol ICC (FCI) 54602-908LF is an unshielded, right-angle modular connector designed for Ethernet and other network interface applications. It features an 8P8C interface, single port, through-hole PCB mounting, solder termination, and gold-plated copper-alloy contacts. The connector is Cat 3 rated, has a 250-cycle mating durability, and operates over a −40°C to +70°C temperature range. Amphenol +1 #Amphenol #54602908LF #RJ45 #EthernetConnector #ModularJack #8P8C #ThroughHole #PCBConnector #Networking #EmbeddedSystems
6 Uses0 StarsKH-SMA-P-8496
Right-angle, through-hole SMA RF coaxial connector for PCB-mounted antenna interfaces and RF signal connections in wireless communication devices, transceivers, and test equipment. Features a board-side female interface with a 5.25 mm interface diameter and a compact, bent configuration for space-constrained designs. Operating frequency and characteristic impedance should be verified against the manufacturer's specifications. #RFConnector #SMA #CoaxialConnector #RightAngle #ThroughHole #PCB #Antenna #WirelessCommunication
6 Uses0 StarsFT234XD-R
The FTDI FT234XD-R is a USB 2.0 Full-Speed (12 Mbps) to UART bridge IC that enables USB connectivity for microcontrollers, embedded systems, and serial communication interfaces. It supports UART data rates up to 3 Mbaud, operates from a 2.97 V to 5.5 V supply, and features configurable I/O voltage from 1.8 V to 3.3 V, integrated clock generation, 512-byte transmit and receive buffers, and USB battery-charger detection. It consumes approximately 8 mA during normal operation and is housed in a compact 12-pin DFN (3 × 3 mm) package supplied on tape and reel. #USBToUART #USBBridge #UART #FTDI #SerialCommunication #EmbeddedSystems #InterfaceIC
8 Uses0 StarsD-DMSC09PM-F001
D-DMSC09PM-F001 is a 9-position, 2-row male D-Sub connector from Ckmtw, designed for reliable signal and data connections in electronic equipment, industrial control systems, and serial communication interfaces. It features through-hole PCB mounting, a 3 A signal current rating, a 250 V voltage rating, and an operating temperature range of −55°C to +105°C. #DSubConnector #MaleConnector #ThroughHole #SerialCommunication #PCBConnector #Ckmtw
6 Uses0 StarsCP2104-F03-GM
The Silicon Labs CP2104-F03-GM is a USB 2.0 full-speed (12 Mbps) to UART bridge controller supporting asynchronous serial communication at baud rates up to 2 Mbps. It integrates a USB transceiver, clock, voltage regulator, and 576-byte transmit and receive buffers, with hardware flow control and four configurable GPIOs. Operating with a 3.0–3.6 V supply and I/O voltages from 1.8 V, it is suitable for USB-to-serial adapters, embedded system debugging, and RS-232/RS-485 interface designs. It is housed in a 24-pin QFN package measuring 4 × 4 mm and operates from −40°C to +85°C. Silicon Labs +2 #USBToUART #USB2.0 #UART #InterfaceController #SerialCommunication #EmbeddedSystems #SiliconLabs
6 Uses0 StarsX12ADGWA3DY1027
Shielded 1-port RJ45 (8P8C) modular Ethernet jack with right-angle through-hole mounting and gold-plated phosphor-bronze contacts. Non-LED design for Ethernet/network interfaces, with an operating temperature range of -40°C to +85°C. #RJ45 #Ethernet #ModularJack #ThroughHole #RightAngle #Shielded #XKBConnection
10 Uses0 StarsX0337WT7B3
37-position D-Sub male connector with two-row, right-angle PCB mounting and locking hardware. Rated for 5 A signal current and 250 V, with an operating temperature range of −55°C to +105°C; suitable for board-to-board, cable, industrial, and instrumentation interfaces. #DSub #DB37 #Connector #XKBConnection #PCBConnector
7 Uses0 Stars
