Interface ICs

802.15.4, Bluetooth, WiFi Bluetooth v5.0, Zigbee Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N8 integrates a 32-bit RISC-V single-core processor running up to 160 MHz, along with 8 MB of embedded SPI flash memory. It supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band for improved efficiency and lower latency Bluetooth Low Energy (BLE 5) for short-range communication IEEE 802.15.4 for protocols such as Thread and Zigbee The module features a built-in PCB antenna, RF circuitry, crystal oscillator, and passive components, making it a complete solution that simplifies hardware design. It provides a wide range of GPIO pins and peripheral interfaces such as UART, SPI, I2C, PWM, ADC, and more, enabling flexible integration with sensors and external devices. Designed for low power consumption, it includes multiple power-saving modes, making it suitable for battery-powered applications. Typical Applications Smart home and IoT devices Wireless sensors and control systems Industrial automation Smart lighting and energy management Matter-compatible devices (via Thread support)

MCP3913 Series 3.6 V 4.5 mA SMT Six-Channel Analog Front End - SSOP-28 The MCP3913A1T-E/SS is a high-performance, multi-channel analog front-end (AFE) from Microchip Technology intended for precision measurement applications. It features six simultaneous sampling 24-bit delta-sigma ADCs with integrated programmable gain amplifiers, enabling accurate acquisition of low-level analog signals. Designed for energy monitoring and industrial sensing, the device provides low noise, high dynamic range, and flexible configuration. It supports SPI communication for efficient interfacing with microcontrollers and digital processing systems. Key Features Six simultaneous sampling 24-bit delta-sigma ADC channels Integrated programmable gain amplifiers per channel High signal-to-noise ratio and low distortion Programmable oversampling ratios for performance tuning Internal voltage reference with external reference option SPI-compatible digital interface Configurable data output formats and control registers Low power operation modes Electrical Characteristics Resolution: 24-bit Number of Channels: 6 Input Configuration: Differential Supply Voltage: 2.7V to 3.6V Operating Temperature Range: -40°C to +125°C Programmable Gain: Up to 32 V/V (typical) Reference Voltage: Internal or external selectable Functional Description The device integrates six high-resolution delta-sigma ADCs that sample input signals simultaneously, ensuring accurate phase and timing relationships across channels. Each input passes through a programmable gain stage, allowing optimization for different sensor levels. Analog signals are digitized using oversampling and digital filtering techniques to achieve high precision and noise reduction. Configuration is handled via internal registers, and data is transferred through an SPI interface. Package Information Package Type: SSOP Pin Count: 28 Mounting Type: Surface Mount Applications Energy metering Power monitoring systems Industrial automation Multi-channel data acquisition Sensor interfacing Smart grid systems Advantages High integration reduces external components Simultaneous sampling improves measurement accuracy High resolution supports precise signal analysis Flexible configuration for various system requirements #commonpartslibrary #integratedcircuit #powermanagement #energymetering

Connector Header Through Hole 10 position 0.100" (2.54mm) The TSW-105-07-G-D is part of the Samtec TSW series, which consists of 0.100″ (2.54 mm) pitch PCB header strips. It is a dual-row, 10-position (2×5) male pin header intended for through-hole mounting on printed circuit boards. This connector provides a simple and reliable way to connect PCBs or interface with cables and other connectors (e.g., female sockets or IDC connectors). Key Features Connector Type: Rectangular header (male pin) Mounting Type: Through-hole (THT) Pitch: 2.54 mm (0.100″ standard spacing) Number of Positions: 10 pins Rows: Dual-row (2×5 configuration) Contact Style: 0.025″ (0.635 mm) square posts Orientation: Vertical (straight header) Plating: Gold (indicated by “G”) for reliable contact Electrical & Mechanical Highlights Current Rating: up to ~6.3 A per contact (series typical) Voltage Rating: up to ~400–550 VAC Operating Temperature: approx. -55 °C to +125 °C High durability: supports multiple mating cycles (extended-life design) Typical Applications Microcontroller and development boards Board-to-board connections Prototyping systems (breadboard-compatible headers) Industrial and embedded electronics Cable-to-board interfaces #CommonPartsLibrary #Connector #Header #TSW

2 Line Common Mode Choke Surface Mount 90 Ohms @ 100 MHz 400mA DCR 190mOhm The ACM2012-900-2P-T002, manufactured by TDK, is a 2-line common mode filter that helps reduce electromagnetic interference (EMI) and radio-frequency interference (RFI) in electronic systems. It is built using a wire-wound chip structure and optimized for high-speed differential signals while maintaining low impact on the desired signal. Key Characteristics Component Type: Common Mode Choke / EMI Filter Lines: 2-line (for differential signal pairs) Impedance: 90 Ω @ 100 MHz Current Rating: up to 400 mA DC Resistance: ~190 mΩ max Voltage Rating: up to 50 V Package Size: 0805 (2.0 × 1.2 mm) Mounting: Surface Mount (SMD) Function Suppresses common-mode noise on signal lines Maintains low differential impedance, so signal integrity is preserved Helps systems pass EMI/EMC compliance In simple terms: It filters out noise without affecting the actual data signal. Typical Applications USB, HDMI, Ethernet lines High-speed communication interfaces Embedded systems and IoT devices Consumer electronics and industrial equipment LVDS and display interfaces #CommonPartsLibrary #Filter #ACM

NAND Flash 3.3V 2Gb 24nm SLC NAND (EEPROM) FLASH - NAND (SLC) Memory IC 2Gbit Parallel 25 ns 67-VFBGA (6.5x8) The TC58NVG1S3HBAI6 is a 2-Gbit (256M × 8) SLC NAND flash memory device originally developed by Toshiba (now Kioxia). It is a CMOS-based, electrically erasable and programmable read-only memory (EEPROM) used to store data even when power is removed. This device uses Single-Level Cell (SLC) NAND technology, which offers high reliability, fast access time, and long endurance, making it suitable for industrial and embedded systems. Key Characteristics Memory Type: NAND Flash (Non-volatile) Technology: SLC (Single-Level Cell) Density: 2 Gbit (256M × 8 organization) Interface: Parallel I/O Supply Voltage: 2.7 V – 3.6 V Access Time: ~25 ns Package: 67-ball VFBGA (compact surface-mount) Functional Overview Organized into pages and blocks (typical NAND structure) Supports operations such as: Read Page program (write) Block erase Copy-back operations Uses shared I/O pins for address, data, and command input/output Internally, data is transferred between the memory array and internal registers in page-sized chunks (~2176 bytes including spare area). Typical Applications Embedded systems storage Firmware and boot memory Industrial control systems Data logging devices Consumer electronics (e.g., cameras, audio storage) #CommonPartsLibrary #IntegratedCircuit #memory #TC58NVG1

MIPS32® M-Class PIC® 32MZ Microcontroller IC 32-Bit 200MHz 2MB (2M x 8) FLASH 100-TQFP (12x12) The PIC32MZ2048EFM100-I/PT is built around a MIPS32® M-Class core operating at up to 200 MHz, delivering high computational performance suitable for real-time control, signal processing, and communication-intensive systems. It integrates large on-chip memory, multiple communication interfaces, and rich peripheral support in a compact package. Key Features Core Architecture: 32-bit MIPS32® M-Class CPU Clock Speed: Up to 200 MHz Program Memory: 2 MB Flash RAM: 512 KB Package: 100-pin TQFP (12×12 mm), surface-mount Operating Voltage: 2.1 V to 3.6 V I/O Pins: Up to 78 programmable I/O Integrated Peripherals & Interfaces Communication Interfaces: CAN, Ethernet, USB OTG I²C, SPI, SQI, UART/USART Parallel Master Port (PMP) Analog Features: 40-channel, 12-bit ADC System Peripherals: DMA controller PWM modules Watchdog timer (WDT) Brown-out reset and power-on reset Advanced Features: Floating Point Unit (FPU) for fast math operations Hardware crypto engine (AES, SHA, etc., depending on variant) High-speed USB and Ethernet connectivity #CommonPartsLibrary #IntegratedCircuit #Microcontroller #PIC® 32MZ

480Mbps Hub USB 2.0 QFN-24(4x4) Interface Controllers RoHS CH334F

General Purpose Digital Isolator 5000Vpk 2 Channel 100Mbps 50kV/µs CMTI 8-SOIC (0.295", 7.50mm Width) General Description The STISO621WTR is a high-performance quad-channel isolated digital input interface IC from STMicroelectronics. It is designed to interface industrial digital inputs (such as PLC inputs) with low-voltage logic systems while providing galvanic isolation for improved safety and noise immunity. This device integrates four independent input channels, each capable of handling high-voltage input signals, and converts them into isolated logic-level outputs. It is ideal for industrial automation, programmable logic controllers (PLCs), and factory control systems where robust signal isolation is required. Key Features Quad isolated digital input channels High common-mode transient immunity (CMTI) Wide input voltage range for industrial signals Integrated current limiting and protection circuitry Compatible with 3.3V and 5V logic outputs Low power consumption High noise immunity and ESD robustness Complies with industrial safety standards Electrical Characteristics Number of Channels: 4 Isolation Type: Galvanic isolation Input Voltage Range: Up to ~30 V (industrial input level) Logic Output Voltage: 3.3 V / 5 V compatible Propagation Delay: Typically low (tens of ns range) Supply Voltage (Vcc): 3.0 V to 5.5 V Operating Temperature Range: -40°C to +125°C Functional Description Each input channel accepts a high-voltage industrial signal and converts it into a corresponding isolated digital output. Internal circuitry provides: Input current limiting Signal conditioning Isolation barrier Output buffering The isolation barrier protects low-voltage control electronics from high-voltage transients, ground loops, and electrical noise. Package Information Package Type: SO-16 (Wide body) Mounting: Surface-mount (SMD) Tape & Reel: Yes (TR suffix) Pin Count: 16 pins Applications Programmable Logic Controllers (PLC) Industrial I/O modules Factory automation systems Motor control interfaces Process control equipment Building automation Advantages Eliminates need for external optocouplers Reduces PCB space and BOM cost Improves system reliability High-speed digital isolation vs traditional opto-isolators Compliance & Standards Industrial-grade reliability ESD protection compliant RoHS compliant Manufacturer Information Manufacturer: STMicroelectronics Part Number: STISO621WTR Series: STISO #commonpartslibrary #isolator

2 Position Wire to Board Terminal Block Vertical with Board 0.138" (3.50mm) Surface Mount The 1250360000 is a high-quality PCB terminal block manufactured by Weidmüller, designed for secure and reliable wire-to-board connections. It features a robust screw-clamp connection system that ensures strong mechanical retention and excellent electrical conductivity. This component is widely used in industrial control systems, power distribution modules, and automation equipment where dependable field wiring is required. The terminal block is designed for easy installation on printed circuit boards and supports solid or stranded wires. Its durable housing material provides resistance to environmental stress, making it suitable for long-term operation in demanding applications. Key Features Screw clamp connection for secure wire termination Through-hole PCB mounting for strong mechanical stability High current carrying capability مقاust insulating housing with flame-retardant properties واضحة labeling area for easy identification Suitable for industrial and automation applications Electrical Characteristics Rated Voltage: 300 V (typical, verify datasheet) Rated Current: Up to 10–16 A (depending on wire size) Contact Resistance: Low (optimized for power applications) Insulation Resistance: High (>10⁸ Ω typical) Mechanical Characteristics Mounting Type: Through-Hole PCB Connection Type: Screw Clamp Number of Positions: Typically 2–12 positions (variant dependent) Wire Gauge Range: ~24 AWG to 12 AWG (approx.) Pitch: Typically 5.00 mm or 5.08 mm (verify exact variant) Material Information Housing Material: Polyamide (PA), flame-retardant (UL94 V-0) Contact Material: Copper alloy Contact Plating: Tin-plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Industrial control systems Power supply units Automation and PLC systems Signal and power distribution boards Building and factory wiring interfaces Notes Exact electrical ratings and pitch may vary depending on the specific configuration under this series. Always refer to the official Weidmüller datasheet for precise parameters before design integration. #commonpartslibrary #connector #terminalblock

OV5640 Omnivision Technologies Camera Sensor. OV5640 provides full-frame, sub-sampled, scaled or windowed 8-bit/10-bit images in a wide range of formats, controlled through the Serial Camera Control Bus (SCCB) interface.