Connectors
A connector is a device that is used to join two or more electrical or mechanical components. Connectors are an essential part of many electronic and mechanical systems, as they allow for the easy transfer of electricity, data, or other signals between different devices or components. There are many different types of connectors, each designed for specific use cases. Some common use cases for connectors include: * Connecting electronic components in circuit boards * Connecting electrical devices to power sources * Connecting mechanical components in machines and devices * Connecting data cables for networking and communication * Connecting audio and video components in home theater systems Flux.ai has the world's largest community-driven public library of connectors, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need to find and use connectors in their projects.
TSW-120-07-G-D
Connector Header Through Hole 40 position 0.100" (2.54mm) Raspberry Pi 40 pin header The TSW-120-07-G-D is a through-hole, double-row vertical header manufactured by Samtec. It features 40 total positions (2 rows of 20 pins) with a standard 2.54 mm pitch. This connector is widely used for board-to-board connections, prototyping, and general-purpose signal routing in embedded and electronic systems. It is designed for reliable mechanical and electrical performance with gold-plated contacts for enhanced conductivity and corrosion resistance. Manufacturer Samtec Inc. Manufacturer Part Number TSW-120-07-G-D Product Type Through-Hole Pin Header Number of Positions 40 (2 × 20) Number of Rows 2 Pitch 2.54 mm (0.100") Row Spacing 2.54 mm (0.100") Mounting Type Through Hole Orientation Vertical Contact Material Phosphor Bronze Contact Plating Gold (Au) over Nickel Plating Thickness Typically 10 µin (0.25 µm) Gold Insulator Material Black Liquid Crystal Polymer (LCP) Current Rating Typically 3.0 A per contact (depending on application conditions) Voltage Rating Typically 250 VAC Operating Temperature Range -55°C to +125°C Termination Type Solder Contact Style Square Post Post Length Standard Samtec “-07” tail length (approx. 2.92 mm tail, varies slightly per datasheet) Applications Embedded systems (e.g., Raspberry Pi GPIO headers) Development boards and expansion modules Board-to-board interconnects Prototyping and test setups Compliance RoHS Compliant Lead-Free Notes Compatible with standard 2.54 mm female headers and sockets Commonly used in stacking or mezzanine configurations Available in various plating options and pin lengths under the TSW series #commonpartslibrary #connector
204 Uses0 StarsPEC06SAAN
Connector Header Through Hole 6 position 0.100" (2.54mm) The PEC06SAAN is a compact, low-cost incremental rotary encoder manufactured by Bourns. It is designed for user interface applications requiring precise rotational input, such as volume controls, menu navigation, and position sensing. This encoder provides reliable quadrature output signals and is suitable for through-hole PCB mounting. Its robust mechanical design ensures long operational life and consistent performance in consumer and industrial electronics. Key Features Incremental (relative) rotary encoder Compact, space-saving design Through-hole mounting configuration Quadrature output (A and B channels) Optional integrated push switch (depending on variant) Detent and non-detent options available High reliability with long rotational life RoHS compliant Electrical Characteristics Supply voltage: Typically 5 VDC (logic-level output) Output type: Digital quadrature (A/B signals) Contact resistance: ≤ 100 mΩ Insulation resistance: ≥ 100 MΩ @ 250 VDC Dielectric strength: 300 VAC for 1 minute Mechanical Characteristics Rotation type: Incremental Number of pulses per revolution (PPR): Typically 6 to 24 (variant dependent) Detent positions: Variant dependent Rotational torque: 10 to 70 gf·cm (typical range) Shaft length: Varies by suffix (e.g., 15 mm typical) Shaft type: Knurled or D-cut (variant dependent) Mounting type: Through-hole PCB Terminal type: PC pins Environmental Specifications Operating temperature range: −30°C to +70°C Storage temperature range: −40°C to +85°C Humidity: Up to 85% RH (non-condensing) Mechanical Life Rotational life: Up to 30,000 cycles (typical) Physical Dimensions Body size: Approximately 12 mm × 11 mm × 5 mm (excluding shaft) Shaft diameter: Typically 6 mm Pin pitch: Standard 2.54 mm Applications Consumer electronics (audio controls, appliances) Industrial control panels Embedded systems and microcontroller interfaces Automotive user interfaces Instrumentation and test equipment #commonpartslibrary #connector #header
31 Uses0 StarsTSW-112-07-G-S
Connector Header Through Hole 12 position 0.100" (2.54mm) pin header 1x12 2.54mm The TSW-112-07-G-S is a single-row, 12-position, 2.54 mm pitch through-hole male pin header from Samtec’s TSW series. It is designed for reliable board-to-board or wire-to-board connections in prototyping and production environments. Featuring gold-plated phosphor bronze contacts and a durable PBT housing, this connector ensures excellent electrical performance, corrosion resistance, and mechanical durability. It is commonly used in embedded systems, development boards, and general-purpose PCB interconnections. Product Type Pin Header / Pin Strip Number of Positions 12 Number of Rows 1 Pitch 2.54 mm (0.1 in) Mounting Style Through Hole Mounting Angle Straight Termination Style Solder Pin Contact Type Male Pin Contact Material Phosphor Bronze Contact Plating Gold Housing Material Polybutylene Terephthalate (PBT) Housing Color Black Flammability Rating UL 94 V-0 Current Rating 4.3 A to 6.3 A (application dependent) Voltage Rating Up to 550 VAC Packaging Bulk Country of Origin Vietnam RoHS Compliance Compliant #commonpartslibrary #connector #header
124 Uses0 Stars36638-0003
Connector Header Board Edge, Through Hole, Right Angle 48 position The 0366380003 is a wire-to-board connector component from Molex, typically used in power and signal connections between wires and a printed circuit board (PCB). Type: Wire-to-board connector housing (crimp style) Positions: 3 circuits (3-pin connector) Pitch: Typically ~3.68 mm (series dependent) Mounting: Cable-side housing (mates with PCB header) Locking mechanism for secure connection #CommonPartsLibrary #Connector #Header #CMC 36638
0 Uses0 StarsDF40HC(3.0)-100DS-0.4V(51)
100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold It is a 100-pin surface-mount receptacle connector used to connect two PCBs in a stacked configuration. The DF40HC series is known for ultra-fine pitch and high-speed signal capability, making it suitable for modern embedded and communication systems. Connector type: Board-to-board (mezzanine), receptacle Number of contacts: 100 positions (2-row layout) Pitch: 0.4 mm (very fine pitch for high-density routing) Stacking height: 3.0 mm (fixed mated height) Mounting: Surface-mount (SMT) Orientation: Straight Contact plating: Gold (for reliable conductivity and corrosion resistance) Rated current: 0.3 A per contact Rated voltage: 50 V AC/DC Contact resistance: ≤ 90 mΩ Withstanding voltage: 150 V max High-speed capability: up to 20 Gbps, supports interfaces like: USB 3.1 / USB 3.0 PCIe SATA MIPI Connector size: Length: ~22.6 mm Width: ~3.38 mm Height: ~2.9 mm Mating durability: ~30 cycles Operating temperature: -55°C to +85°C #CommonPartsLibrary #Connector #Mezzanine-connector #DF40
57 Uses0 Stars
