Connectors

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Surface Mount, Right Angle; Through Hole Waterproof USB Type-C connector providing a reversible USB Type-C interface for data and power connections in electronic applications. The connector features a waterproof design, USB Type-C receptacle interface, and supports a rated voltage of 5 V DC and current rating of 3 A as specified in the manufacturer datasheet. #USBTypeC #WaterproofConnector #USBConnector #AmphenolICC #PCBConnector #ElectronicComponents

CONN MOD JACK RJ45 TH The HR911130A is a single-port RJ45 MagJack® Ethernet connector from HanRun Electronics with integrated Ethernet isolation magnetics and green/yellow status LEDs in a compact through-hole, right-angle package. Per the datasheet, it is designed for 100/1000Base-T Ethernet applications and meets or exceeds IEEE 802.3ab requirements, simplifying PCB layout by eliminating the need for external isolation transformers. Key Features Single-port RJ45 connector with integrated Ethernet magnetics Supports 100/1000Base-T Ethernet applications Integrated green/yellow link/activity LED indicators Shielded metal housing for improved EMI performance Through-hole, right-angle PCB mounting Compliant with IEEE 802.3ab Ethernet requirements 1500 Vrms isolation between UTP side and chip side Integrated 4 x 75 ohm termination network and 1000 pF / 2 kV capacitor shown in datasheet Reduces external component count and PCB space RoHS compliant Shield / mechanical notes: footprint pads 15 and 16 are plated through-hole shield/mechanical tabs; pads 17 and 18 are non-plated locating holes. The current schematic exposes pins 1-14 as electrical terminals; shield tabs 15/16 are documented as physical shield/mechanical tabs and are not exposed as separate schematic terminals. Ideal for routers, switches, embedded Ethernet devices, industrial control, IoT equipment, and other 100/1000Base-T network interfaces. #HR911130A #HanRun #RJ45 #MagJack #Ethernet #LAN #IntegratedMagnetics #NetworkConnector #PCB #EmbeddedSystems #IndustrialElectronics #IoT #ThroughHole #IEEE8023ab #1000BaseT

15 Position D-Sub Plug, Male Pins Connector 5747841-4 is a right-angle, through-hole 15-position D-Sub male connector from the AMPLIMITE HD-20 series by TE Connectivity. It is designed for reliable board-to-board and signal interconnection applications, featuring a durable metal shell, gold-plated contacts for excellent conductivity and corrosion resistance, and integrated boardlocks for secure PCB mounting. This connector is commonly used in industrial equipment, communication systems, instrumentation, and embedded electronics requiring robust D-Sub connectivity. Key Features 15-position D-Sub male (plug) connector Right-angle PCB mounting Through-hole solder termination AMPLIMITE HD-20 series Board-to-board signal connector Gold-plated brass contacts for high reliability Carbon steel front shell with tin plating Integrated boardlocks and 4-40 UNC threaded inserts Maximum current rating: 6 A per contact Operating temperature: -55°C to +105°C Recommended PCB thickness: 1.57 mm (0.062 in) UL 94V-0 compliant housing materials #TEConnectivity #AMPLIMITE #DSub #DB15 #RightAngleConnector #ThroughHole #PCBConnector #BoardToBoard #SignalConnector #IndustrialElectronics #ElectronicComponents

-40℃~+85℃ 1.2V、3.3V 5.4Gbps Driver I2C QFN-64(7.5x7.5) Video Interface ICs ROHS The LT7911D is a high performance Type-C to MIPI®DSI/CSI chip for VR/Display application. For DP1.2 input, LT7911D can be configured as 1/2/4 lane. Adaptive equalization makes it suitable for long cable application and the maximum bandwidth is up to 21.6Gbps. For MIPI®DSI/CSI output, LT7911D features configurable single-port or dual-port MIPI®DSI/CSI with 1 high-speed clock lane and 1~4 high-speed data lanes operating at maximum 1.5Gbps/lane, which can support a total bandwidth of up to 12Gbps. LT7911D supports burst mode DSI video data transferring, also supports flexible video data mapping path. For LVDS output, LT7911D can be configured as single-port or dual-port Features  Type-C  Compliant with VESA DisplayPort Alt Mode on USB Type-C Standard version1.0  Compliant with USB Power Delivery Rev.2.0  Compatible with USB Type-C V1.1  Built-in CC controller for plug and orientation detection  One port CC for UFP communication  DP/eDP Receiver  Compliant with DisplayPort Specification 1.2 for 1.62Gbps, 2.7Gbps ,5.4Gbps  Compliant with Embedded DisplayPort (eDP) Specification version 1.4  Support DisplayPort 1, 2，4 lanes  Support HDCP 1.3  Support eDP Authentication: Alternative Scramble Seed Reset  Adaptive DisplayPort Receiver Equalization for PCB, cable and connector losses  Single/Dual-Port MIPI® DSI/CSI Transmitter  Compliant with DCS1.02, D-PHY1.2& DSI1.02 &CSI-2 1.0  1 Clock Lane, and 1~4 Configurable Data Lanes per port  1/2 configurable port  80Mbps~1.5Gbps per data lane  Maximum 64pixels overlap for each half  Both non-burst and burst video mode supported  Support RGB666, Loosely RGB666, RGB888, RGB565, 16-bit YCbCr4:2:2,20-bit YCbCr4:2:2,24-bit YCbCr 4:2:2 Video Format  Video stream copy mode for each port  Side-by-side 3D support  Single/Dual-Port LVDS Transmitter  Compatible with VESA and JEIDA standard  1/2 Configurable Port  1 clock lane and 4 configurable data lanes per port  Support Maximum Data Rate 1.2Gbps/lane  Output Color Depth supports 6-bit and 8-bit  Video stream copy mode for each port  Side-by-side 3D support  Miscellaneous  3.3V/1.2V Supply Power  Internal CSC support conversions between YCbCr 4:4:4 and RGB, and between YCbCr 4:2:2 and YCbCr 4:4:4  Support SPDIF and 2-channel IIS audio output  Support 100KHz I2C slave  Integrated Microprocessor  Temperature Range: -40°C ~ +85°C  ESD ±2kV HBM #LT7911D #Lontium #DisplayBridge #DisplayPort #USBTypeC #MIPIDSI #MIPICSI #LVDS #VideoConverter #EmbeddedSystems #DisplayInterface #VR #IndustrialDisplay #DisplayController

Connector Header Surface Mount 10 position 0.039" (1.00mm) #JST #BM10BSRSSTB #SHSeries #BoardToWire #SMTConnector #MaleHeader #OneMillimeterPitch #PCBConnector #EmbeddedSystems #ElectronicsDesign #SurfaceMount #Interconnect

DGUK411Q199DB2A1DP (POE+) is a single-port RJ45 Ethernet connector with integrated magnetics (MagJack) designed for 10/100/1000BASE-T Gigabit Ethernet applications. It supports Power over Ethernet Plus (PoE+) in compliance with IEEE 802.3at, allowing both data and power transmission through a single Ethernet cable. The connector features integrated isolation transformers, EMI suppression, LED indicators for link/activity status, and a shielded through-hole right-angle design, making it suitable for networking equipment, industrial Ethernet devices, IP cameras, wireless access points, and PoE-powered embedded systems. Key Features Single-port RJ45 connector with integrated magnetics (MagJack) Supports 10/100/1000BASE-T Gigabit Ethernet PoE+ (IEEE 802.3at) compatible for Power Sourcing Equipment (PSE) and Powered Device (PD) applications Integrated isolation transformers and common-mode noise filtering Shielded construction for improved EMI performance Right-angle, through-hole PCB mounting Built-in dual LED indicators for link and activity status High isolation voltage (2250 VDC) RoHS compliant Ideal for routers, switches, industrial controllers, IP cameras, IoT gateways, and other Gigabit Ethernet devices with PoE support #RJ45 #MagJack #EthernetConnector #GigabitEthernet #1000BASE_T #PoEPlus #IEEE8023at #IntegratedMagnetics #Networking #IndustrialEthernet #EmbeddedSystems #ThroughHole #ShieldedConnector #PCBDesign

Connector Header Surface Mount 6 position 0.049" (1.25mm) #BM06BGHSTBT #JST #Connector #RectangularConnector #BoardToWireConnector #Header #MaleHeader #SurfaceMountConnector #GHSeries #OnePointTwoFiveMillimeterPitch #SixPosition #ShroudedHeader #SMTConnector #CategoryConnectors #CategoryRectangularConnectors #CategoryHeadersMalePins #CommonPartsLibrary

Connector Header Through Hole 2 position 0.100" (2.54mm) Male pin header for board-to-board or cable interconnection, featuring 2 positions in a single-row, 2.54 mm (0.100") pitch through-hole breakaway design. Rated for 3 A current, with phosphor bronze square contacts, gold-plated mating contacts, tin-plated solder tails, and an operating temperature range of -65°C to +125°C. #MaleHeader #PinHeader #BoardToBoard #ThroughHole #BreakawayHeader #2Position #2p54mmPitch #3A #SullinsConnectorSolutions #Connector