Resistors

HoJLR2512-3W-5mR-1% is a low-resistance current sense resistor designed for high-power current measurement and power monitoring applications in embedded and industrial electronic systems. Constructed using precision metal alloy resistive material, the component provides stable resistance characteristics, low temperature coefficient, and high current handling capability for accurate current sensing under demanding operating conditions. This resistor is optimized for use in power management circuits, battery monitoring systems, motor control applications, DC-DC converters, automotive electronics, and industrial power distribution platforms. Its low resistance value minimizes power loss while enabling precise current measurement when used with amplifiers, ADCs, or dedicated current sensing circuitry. The HoJLR2512-3W-5mR-1% features a compact surface-mount package suitable for automated PCB assembly and high-density layouts. Its robust thermal performance and precision tolerance characteristics make it suitable for high-efficiency power systems requiring reliable current monitoring and overload detection functionality. #commonpartslibrary #currentsenseresistor #shuntresistor #powermanagement #passivecomponents #embeddedhardware #powersupply #industrialelectronics #surfacemountdevice #electronicscomponents

Battery Battery Monitor IC Lithium Ion 8-TDFN-EP (2x2) The MAX17048/MAX17049 ICs are tiny, micropower current fuel gauges for lithium-ion (Li+) batteries in handheld and portable equipment. The MAX17048 operates with a single lithium cell and the MAX17049 with two lithium cells in series. The ICs use the sophisticated Li+ battery-modeling algorithm ModelGauge™ to track the battery relative state-ofcharge (SOC) continuously over widely varying charge and discharge conditions. The ModelGauge algorithm eliminates current-sense resistor and battery-learn cycles required in traditional fuel gauges. Temperature compensation is implemented using the system microcontroller. The ICs automatically detect when the battery enters a low-current state and enters low-power 3µA hibernate mode, while still providing accurate fuel gauging. The ICs automatically exit hibernate mode when the system returns to active state. On battery insertion, the ICs debounce initial voltage measurements to improve the initial SOC estimate, thus allowing them to be located on system side. SOC, voltage, and rate information is accessed using the I2C interface. The ICs are available in a tiny 0.9mm x 1.7mm, 8-bump wafer-level package (WLP), or a 2mm x 2mm, 8-pin TDFN package. ● MAX17048: 1 Cell, MAX17049: 2 Cells ● Precision ±7.5mV/Cell Voltage Measurement ● ModelGauge Algorithm • Provides Accurate State-of-Charge • Compensates for Temperature/Load Variation • Does Not Accumulate Errors, Unlike Coulomb Counters • Eliminates Learning • Eliminates Current-Sense Resistor ● Ultra-Low Quiescent Current • 3μA Hibernate, 23μA Active • Fuel Gauges in Hibernate Mode • Automatically Enters and Exits Hibernate Mode ● Reports Charge and Discharge Rate ● Battery-Insertion Debounce • Best of 16 Samples to Estimate Initial SOC ● Programmable Reset for Battery Swap • 2.28V to 3.48V Range ● Configurable Alert Indicator • Low SOC • 1% Change in SOC • Battery Undervoltage/Overvoltage • VRESET Alert ● I2C Interface ● 8-Bit OTP ID Register (Contact Factory) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-management #MAX17048

680 kOhms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film The CFR-25JB-52-680K is a carbon film through-hole resistor designed for general-purpose electronic applications requiring stable resistance characteristics, reliable long-term performance, and cost-effective implementation. This resistor is commonly used in signal conditioning, voltage division, pull-up and pull-down networks, biasing circuits, and low-power analog or digital systems. Its axial leaded construction supports automated insertion and conventional through-hole assembly methods, making it suitable for consumer electronics, industrial controls, instrumentation, and embedded systems. The device utilizes carbon film resistive technology to provide dependable electrical performance with moderate noise characteristics and good environmental stability. The flame-retardant coating enhances mechanical durability and improves resistance against moisture and environmental exposure. The component is optimized for standard operating environments where compact size, stable operation, and economical design are required. Electrical Characteristics Resistance Value: 680 kΩ Resistance Tolerance: ±5% Resistor Technology: Carbon Film Rated Power Dissipation: 1/4 W Maximum Working Voltage: 250 V Maximum Overload Voltage: 500 V Temperature Coefficient: ±350 ppm/°C Insulation Resistance: High reliability insulation structure suitable for general electronic equipment Mechanical Characteristics Package Type: Axial Through-Hole Mounting Style: Through Hole Body Style: Cylindrical Flame-Retardant Coated Body Lead Material: Tin-Plated Copper Lead Configuration: Axial Leads for PCB insertion Environmental Characteristics Operating Temperature Range: −55°C to +155°C Moisture Resistance: Suitable for standard humidity environments Flame Resistance: Flame-retardant protective coating compliant with general safety requirements Applications Signal Conditioning Circuits Voltage Divider Networks Pull-Up and Pull-Down Resistors Industrial Control Electronics Consumer Electronic Products General Analog and Digital Circuitry Embedded Systems and Microcontroller Interfaces #commonpartslibrary #passivecomponents #resistor #carbonfilm #throughhole #axialresistor #powermanagement #analog #digital #industrialelectronics

- Voltage Regulator IC 1 Output 30-FC2QFN (4x4) The MAX77960B/MAX77961B are high-performance wide-input 3A (MAX77960B)/6A (MAX77961B) buckboost chargers with Smart Power Selector™ and operate as a reverse buck converter without an additional inductor, allowing the ICs to power USB on-the-go (OTG) accessories. The devices integrate low-loss power switches and provide high efficiency, low heat, and fast battery charging in a small solution size. The reverse buck has true load disconnect and is protected by an adjustable output current limit. The devices are highly flexible and programmable through I2C configuration or autonomously through resistor configuration. The battery charger includes the Smart Power Selector to accommodate a wide range of battery sizes and system loads. The Smart Power Selector allows the system to start up smoothly when an input source is available even when the battery is deeply discharged (dead battery) or missing. For battery safety/authentication reasons, the ICs can be configured to keep charging disabled, and allow the DC-DC to switch and regulate the SYS voltage. The system processor can later enable charging using I2C commands as appropriate. Alternatively, the ICs can be configured to automatically start charging. #CommonPartsLibrary #IntegratedCircuit #PowerManagement #MAX77961

Charger IC Lithium Ion 49-WLP (3.46x3.46) The MAX77962 is a high-performance wide-input 3.2A buck-boost charger with a Smart Power Selector™ and operates as a reverse buck without an additional inductor, allowing the IC to power USB On-the-Go (OTG) accessories. The device integrates low-loss power switches, and provides small solution size, high efficiency, low heat, and fast battery charging. The reverse buck has true-load disconnect and is protected by an adjustable output current limit. The device is highly flexible and programmable through I2C configuration or autonomously through resistor configuration. The battery charger includes a Smart Power Selector to accommodate a wide range of battery sizes and system loads. The Smart Power Selector allows the system to start up gracefully when an input source is available even when the battery is deeply discharged (dead battery) or missing. For battery safety/authentication reasons, the IC can be configured to keep charging disabled, and allow the DC-DC to switch and regulate the SYS voltage. The system processor can later enable charging using the appropriate I2C commands. Alternatively, the IC can be configured to automatically start charging. ● 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage ● 97% Peak Efficiency at 9VIN/7.4VOUT/1.5AOUT ● Reverse Leakage Protection ● 50mA to 3.15A Programmable Input Current Limit ● 50mA to 3.2A Programmable Constant Current Charge ● Remote Differential Voltage Sensing ● 600kHz or 1.2MHz Switching Frequency Options ● System Instant On with Smart Power Selector PowerPath ● Charge Safety Timer ● Die Temperature Regulation with Thermal Foldback Loop ● Input Power Management with Adaptive Input Current Limit (AICL) and Input Voltage Regulation ● 10mΩ BATT to SYS Switch, Up to 10A Overcurrent Threshold ● Reverse Buck Mode 5.1V/1.5A to Support USB OTG ● JEITA Compliant with NTC Thermistor Monitor ● I 2C or Resistor Programmable ● 3.458mm x 3.458mm 49-Bump WLP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #MAX77962

Hot Swap Controller 1 Channel General Purpose 32-LQFN (5x5) The NCP81428MNTXG is a high-performance multi-phase synchronous buck controller designed for CPU, GPU, FPGA, ASIC, and high-current core power applications requiring accurate voltage regulation, fast transient response, and high efficiency. The device supports multi-phase operation with integrated gate drivers and advanced control architecture optimized for modern low-voltage, high-current power rails. It is intended for applications requiring dynamic voltage scaling, precise load-line regulation, and reliable system power management in computing, networking, telecommunications, and industrial platforms. The controller operates with external MOSFET stages and supports flexible power stage configuration for optimized thermal and efficiency performance. It incorporates differential voltage sensing, programmable protection features, current balancing between phases, and high-speed transient compensation to maintain stable operation under rapidly changing load conditions. Engineering Specification Manufacturer onsemi Manufacturer Part Number NCP81428MNTXG Device Type Multi-Phase Synchronous Buck Controller with Integrated Gate Drivers Control Topology Voltage Mode Multi-Phase PWM Control Phase Configuration Dual-Phase Controller Architecture Application Focus CPU Core Power GPU Core Regulation FPGA Power Rails ASIC Core Supplies High-Current DC-DC Regulation Input Supply Range Supports Low-Voltage Bias Supply Operation for Digital Power Systems Output Voltage Regulation Programmable Low-Voltage Output Regulation with Differential Remote Sense Capability Switching Frequency Programmable PWM Switching Frequency with Multi-Phase Interleaving Gate Driver Integration Integrated High-Side and Low-Side MOSFET Gate Drivers Current Sensing Supports Inductor DCR Sensing and Sense Resistor Current Monitoring Load-Line Support Programmable Load-Line Regulation and Droop Compensation Voltage Positioning Adaptive Voltage Positioning for Improved Transient Performance Protection Features Overcurrent Protection Overvoltage Protection Undervoltage Protection Thermal Protection Short-Circuit Protection Power-Good Monitoring Power Management Features Soft-Start Control Enable Functionality Phase Balancing Fault Monitoring Sequencing Support Compensation External Compensation Network Support for Loop Stability Optimization Efficiency Features Synchronous Rectification Support Multi-Phase Interleaving for Reduced Ripple Current Optimized Gate Drive Timing Package Type QFN Surface-Mount Package Mounting Type Surface Mount Technology Temperature Range Industrial Operating Temperature Range Target Applications Server Motherboards High-Performance Embedded Computing Networking Equipment Telecommunications Infrastructure Industrial Processing Systems Graphics and Accelerator Platforms #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

Current Sense Amplifier 1 Circuit Single-Ended SOT-23-6 The INA187A3IDBVR is a precision high-side and low-side current sense amplifier designed for accurate bidirectional current measurement in power management, motor control, battery monitoring, and industrial sensing applications. The device integrates a matched precision gain stage optimized for shunt resistor voltage amplification while maintaining excellent common-mode rejection and low offset drift. It supports wide common-mode input voltages, enabling current monitoring across supply rails in automotive, industrial, and embedded systems. The amplifier features fast response characteristics, low quiescent current consumption, and a compact surface-mount package suitable for space-constrained designs. Engineering Specification Device Type Precision Current Sense Amplifier Manufacturer Texas Instruments Manufacturer Part Number INA187A3IDBVR Amplifier Configuration Current shunt monitor with fixed gain Gain Variant High fixed gain configuration optimized for low-value shunt resistor sensing Input Measurement Capability Bidirectional current sensing Common-Mode Voltage Range Supports high-side and low-side sensing across wide supply rails Input Offset Characteristics Low offset voltage with low temperature drift for accurate current measurement Bandwidth Performance Wide bandwidth suitable for dynamic load and transient current monitoring Response Time Fast settling and propagation performance for real-time current feedback systems Power Supply Requirements Single-supply operation compatible with low-voltage logic systems Output Type Analog voltage output proportional to sensed shunt voltage Common-Mode Rejection High common-mode rejection ratio for stable operation in noisy environments Temperature Performance Industrial operating temperature range with stable gain accuracy over temperature Protection Features Robust input structure designed for high common-mode environments Package Type SOT-23 surface-mount package Mounting Method Surface mount technology Typical Applications Battery management systems, power distribution monitoring, motor current feedback, DC/DC converter monitoring, industrial automation, telecom power systems, and embedded power diagnostics. #commonpartslibrary #integratedcircuit #currentsenseamplifier

Power Supply Controller Digital Power Monitor 10-VSSOP The INA228AIDGSR is a high-precision digital power monitor and current-sense amplifier designed for accurate measurement of shunt voltage, bus voltage, current, power, energy, and charge in DC power systems. The device integrates a low-offset differential amplifier with high-resolution analog-to-digital converters and supports bidirectional current sensing across a wide common-mode voltage range. Communication is provided through an I²C- and SMBus-compatible digital interface, enabling direct telemetry integration into embedded control and battery management systems. The device is optimized for high-accuracy power monitoring applications requiring low drift, low offset, and high dynamic range. Integrated mathematical computation functions reduce host processor overhead by internally calculating current, power, accumulated energy, and charge values. Programmable conversion timing and averaging modes allow optimization between measurement speed and noise performance. The INA228AIDGSR is suitable for server power distribution, industrial automation, telecom infrastructure, automotive subsystems, battery-powered equipment, and precision instrumentation requiring real-time power analytics and fault monitoring. Engineering Specification Device Type Digital power monitor with integrated current-sense amplifier and high-resolution ADC. Measurement Functions Supports measurement of: Differential shunt voltage Bus voltage Current Power Energy accumulation Charge accumulation Temperature through external sensing methods Current Sensing Supports bidirectional current measurements using an external shunt resistor with programmable calibration scaling. ADC Architecture Incorporates high-resolution delta-sigma analog-to-digital converters with programmable conversion time and averaging configuration. Interface Uses I²C- and SMBus-compatible serial communication interface with programmable device addressing. Voltage Monitoring Supports high-side and low-side sensing across a wide common-mode input voltage range suitable for multi-rail power systems. Accuracy Features Includes: Low input offset voltage Low offset drift Precision gain architecture High measurement linearity Integrated calibration engine Power Computation Internally computes: Instantaneous power Average power Energy accumulation over time Charge accumulation over time Alert and Protection Features Provides programmable alert functionality for: Overcurrent Undervoltage Overvoltage Power threshold violations Conversion-ready indication Operating Modes Supports: Continuous conversion mode Triggered conversion mode Low-power shutdown mode Package Information Supplied in a compact VSSOP surface-mount package suitable for automated PCB assembly and space-constrained applications. Temperature Range Designed for operation across industrial temperature environments suitable for embedded and power-management systems. Typical Applications Battery management systems Power supply monitoring Server and telecom power rails Industrial control systems DC energy metering Embedded power analytics Automotive electronics Portable instrumentation #commonpartslibrary #integratedcircuit #powermanagement #powersupplycontroller

680 Ohms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film The CFR-25JB-52-680R is a through-hole carbon film resistor manufactured by YAGEO. It provides a resistance value of 680 Ω with ±5% tolerance and is designed for general-purpose electronic circuits, signal conditioning, and current limiting applications. Key Features Resistance: 680 Ω Tolerance: ±5% Power Rating: 0.25 W (1/4 W) Resistor Type: Carbon film resistor Mounting Type: Through-hole / axial lead Package Style: Axial Operating Temperature: -55°C to +155°C Temperature Coefficient: -500 / +350 ppm/°C AEC-Q200 qualified for automotive-grade reliability RoHS compliant Typical Applications Current limiting Voltage divider circuits Pull-up / pull-down resistors General analog and digital electronics Automotive and consumer electronics Physical Characteristics Axial cylindrical body Approximate body size: 2.4 mm diameter × 6.3 mm length 2-terminal leaded package The component belongs to the through-hole resistor category and is commonly used in low-power electronic designs requiring stable and economical resistance values. #CommonPartsLibrary #Resistor #Axial

Comparator Standard (General Purpose) Open-Collector, Rail-to-Rail 8-PDIP The LM393N is a dual independent voltage comparator designed for operation from a single power supply over a wide range of voltages. It can also operate from split power supplies, allowing flexible integration into analog and mixed-signal systems. Each comparator features high gain and low input offset voltage, enabling precise comparison between two input signals. The device is optimized for low power consumption and supports open-collector outputs, making it suitable for interfacing with a variety of logic families and external circuits. Its robust design allows reliable performance across a broad temperature range, making it appropriate for industrial, automotive, and consumer applications. Functional Overview The device contains two separate comparators sharing a common power supply. Each comparator compares the voltage at its inverting and non-inverting inputs and drives the output transistor accordingly. The open-collector output stage allows wired-OR configurations and easy level shifting using an external pull-up resistor. When the non-inverting input voltage exceeds the inverting input voltage, the output transistor turns off, allowing the output to be pulled high externally. When the inverting input is higher, the transistor conducts and pulls the output low. Electrical Characteristics The LM393N operates over a wide supply voltage range and exhibits low input bias current and low input offset voltage, contributing to stable and accurate performance. The input common-mode voltage range includes ground, enabling ground-referenced sensing. The output stage is capable of sinking current sufficient to drive loads such as LEDs, relays (with appropriate buffering), or logic inputs. The device is designed for low supply current, supporting energy-efficient designs. Input and Output Behavior Inputs are high impedance and suitable for direct connection to sensors, reference voltages, or signal conditioning networks. The output requires an external pull-up resistor to define the high logic level. This configuration allows flexibility in selecting output voltage levels independent of the supply voltage, within device limits. The open-collector structure also supports multiple outputs connected together for logical operations. Thermal and Environmental Conditions The device is specified for operation across a wide temperature range, ensuring stable functionality under varying environmental conditions. Proper thermal management and adherence to recommended operating conditions ensure long-term reliability. Packaging and Pin Configuration The LM393N is typically provided in a dual in-line package suitable for through-hole mounting. The pin configuration supports two independent comparator channels, each with inverting input, non-inverting input, and output, along with shared power supply and ground connections. Applications The LM393N is suitable for voltage level detection, threshold sensing, zero-crossing detection, oscillator circuits, pulse generation, and analog-to-digital interfacing. It is commonly used in power management systems, battery monitoring, signal conditioning, and embedded control systems. Design Considerations External components such as pull-up resistors, input filtering networks, and hysteresis feedback may be required depending on the application. Careful layout and noise considerations improve performance in high-sensitivity circuits. The open-collector output requires proper configuration to ensure correct logic levels and switching behavior. #commonpartslibrary #integratedcircuit #comparator