Timers and RTCs
Timers and Real-Time Clocks (RTCs) are electronic devices that are used to measure time or keep track of the current time. They can be found in a wide range of applications, including computers, phones, and appliances. Timers are used to trigger an action after a specific period of time has elapsed. They can be used to control the duration of an event, or to schedule tasks to be performed at a later time. RTCs, on the other hand, are used to maintain accurate time even when the device is powered off. They are often used in devices that need to keep track of the current time and date, such as alarm clocks and smart thermostats. If you're looking for high-quality timers and RTCs for your electronic projects, you should check out Flux.ai. They have the world's largest community-driven public library of timers and RTCs, with footprints, symbols, datasheets, and simulation models. This makes it easy for you to find the components you need for your project, and ensures that you have access to accurate and up-to-date information about each component. Whether you're a professional engineer or a hobbyist, Flux.ai has the resources you need to get your project off the ground.
AT32F421K8U7
ARM-based 32-bit Cortex-M4 MCU with Flash, timers, ADC, CMP and communication interfaces Microcontroller based on an ARM® Cortex®-M4 core, designed for embedded control applications with a maximum operating frequency of 120 MHz. It operates from a 2.4 V to 3.6 V supply, integrates 64 KB Flash, 8 KB SRAM, a 12-bit 2 MSPS ADC, 10 timers, 2× USART, 2× SPI/I²S, 2× I²C, DMA, enhanced RTC, comparator, and is housed in a 32-pin QFN (5 × 5 mm) package. #Microcontroller #ARMCortexM4 #120MHz #64KBFlash #8KBSRAM #12bitADC #DMA #USART #SPI #I2C #QFN32 #ARTERY
4 Uses0 StarsAD5758BCPZ-RL7
Single-Channel 16-Bit Current/Voltage Output DAC with HART® Connectivity – Precision industrial digital-to-analog converter (DAC) for process control, programmable logic controllers (PLC), distributed control systems (DCS), actuator control, industrial automation, and isolated analog output modules. Features 16-bit resolution with a single configurable output supporting current ranges of 0–20 mA, 4–20 mA, 0–24 mA, ±20 mA, ±24 mA, and −1 mA to +22 mA, as well as voltage ranges of 0–5 V, 0–10 V, ±5 V, and ±10 V. Operates from dual supplies up to ±33 V (60 V maximum across rails) and incorporates Dynamic Power Control (DPC) using an integrated buck converter to minimize power dissipation. Features HART® signal coupling, 12-bit diagnostic ADC, integrated precision reference, SPI interface (up to 50 MHz) with CRC and watchdog timer, programmable gain and offset, output fault protection (±38 V miswire protection), and comprehensive diagnostics for high-reliability industrial systems. Designed for −40°C to +115°C operation and housed in a compact 32-lead LFCSP (5 × 5 mm) package. #AnalogDevices #AD5758BCPZRL7 #AD5758 #DAC #IndustrialDAC #CurrentLoop #VoltageOutput #420mA #HART #PLC #ProcessControl #SPI #EmbeddedSystems
14 Uses0 StarsSCD40-D-R1
Single-Channel 16-Bit Current/Voltage Output DAC with HART® Connectivity – Precision industrial digital-to-analog converter (DAC) for process control, programmable logic controllers (PLC), distributed control systems (DCS), actuator control, industrial automation, and isolated analog output modules. Features 16-bit resolution with a single configurable output supporting current ranges of 0–20 mA, 4–20 mA, 0–24 mA, ±20 mA, ±24 mA, and −1 mA to +22 mA, as well as voltage ranges of 0–5 V, 0–10 V, ±5 V, and ±10 V. Operates from dual supplies up to ±33 V (60 V maximum across rails) and incorporates Dynamic Power Control (DPC) using an integrated buck converter to minimize power dissipation. Features HART® signal coupling, 12-bit diagnostic ADC, integrated precision reference, SPI interface (up to 50 MHz) with CRC and watchdog timer, programmable gain and offset, output fault protection (±38 V miswire protection), and comprehensive diagnostics for high-reliability industrial systems. Designed for −40°C to +115°C operation and housed in a compact 32-lead LFCSP (5 × 5 mm) package. #AnalogDevices #AD5758BCPZRL7 #AD5758 #DAC #IndustrialDAC #CurrentLoop #VoltageOutput #420mA #HART #PLC #ProcessControl #SPI #EmbeddedSystems
0 Uses0 StarsPIC16LF19156-I_MV
PIC PIC® XLP™ 16F Microcontroller IC 8-Bit 32MHz 28KB (16K x 14) FLASH 28-UQFN (4x4) 8-bit PIC microcontroller for embedded control applications, operating from a 1.8 V to 3.6 V supply with a maximum CPU frequency of 32 MHz. It integrates 28 KB Flash, 2 KB RAM, 256 bytes EEPROM, a 12-bit ADC with up to 20 channels, 5-bit DAC, SPI, I²C, and EUSART interfaces, 24 GPIOs, LCD controller support, multiple timers, PWM, comparators, and Core Independent Peripherals in a 28-pin UQFN package. #Microcontroller #8BitMCU #PIC16LF19156 #Microchip #EmbeddedSystems #FlashMCU #LowPower #12BitADC #SPI #I2C #EUSART #PWM #LCDController #UQFN28 #PCBLibrary
1 Uses0 StarsEFM8BB52F32G-C-QFN32
8-bit Microcontrollers - MCU 5 Volt 8051 50 Mhz 32 kB flash 2.304 kB RAM 29 GPIO BB5 8-bit MCU 8-bit microcontroller designed for embedded control applications, featuring a CIP-51 (8051-compatible) core operating at up to 50 MHz. It integrates 32 KB Flash memory, 2.3 KB RAM, operates from a 1.8 V to 5.5 V supply, and includes 12-bit ADC, 10-bit DAC, SPI, 2× SMBus/I²C, 2× UART, four 16-bit timers, and 29 GPIOs in a 32-pin QFN package. #SiliconLabs #EFM8BB52 #Microcontroller #MCU #8051 #CIP51 #EmbeddedSystems #FlashMemory #QFN32 #SPI #I2C #SMBus #UART #ADC #DAC #GPIO
0 Uses0 StarsLCMXO2-1200HC-6SG32I
MachXO2 Field Programmable Gate Array (FPGA) IC 21 65536 1280 32-UFQFN Exposed Pad The LCMXO2-1200HC-6SG32I is a low-power, non-volatile MachXO2 FPGA (Field-Programmable Gate Array) from Lattice Semiconductor. It is designed for cost-sensitive applications requiring instant-on operation, flexible programmable logic, and reliable system control. With 1,280 logic cells (LUTs), embedded memory, and integrated hardware functions such as I²C, SPI, PLL, and timer/counter, it is well suited for industrial, consumer, communications, and embedded control applications. The device is housed in a compact 32-pin QFN (5 × 5 mm) package and supports an industrial operating temperature range of −40°C to +100°C. Key Features MachXO2 non-volatile FPGA with instant-on capability 1,280 logic cells (LUTs) and 160 logic blocks 21 user-programmable I/O pins 64 Kbits Embedded Block RAM (EBR) plus distributed RAM 64 Kbits User Flash Memory (UFM) for non-volatile data storage 1 integrated PLL for clock management Built-in I²C, SPI, and timer/counter support TransFR™ technology for live, glitch-free FPGA reconfiguration 2.375 V to 3.465 V operating supply Industrial temperature range: −40°C to +100°C Compact 32-pin QFN (5 × 5 mm) surface-mount package Optimized for low power consumption and space-constrained embedded designs. #LatticeSemiconductor #MachXO2 #FPGA #ProgrammableLogic #LowPowerFPGA #InstantOn #EmbeddedSystems #IndustrialElectronics #SystemControl #QFN32
0 Uses0 StarsSTM32F103VET6
32-bit ARM Cortex-M3 microcontroller operating at up to 72 MHz, featuring 512 KB Flash memory, 64 KB SRAM, and 80 programmable I/O pins. Operates from a 2.0 V to 3.6 V supply and integrates 3 × 12-bit ADCs (16 channels), 2 × 12-bit DACs, multiple timers with PWM capability, and communication interfaces including CAN, USB, I²C, SPI, I²S, SDIO, UART, and USART. Housed in a 100-pin LQFP package. #STM32 #STM32F103VET6 #Microcontroller #ARMCortexM3 #32BitMCU #72MHz #512KBFlash #64KBSRAM #LQFP100 #EmbeddedSystems #CAN #USB #SPI #I2C #UART #SDIO #ADC #DAC #STMicroelectronics
1 Uses0 StarsAVR128DB48-I/PT
8-bit Microcontroller – AVR® DB 8-bit microcontroller operating at up to 24 MHz, featuring 128 KB Flash memory, 16 KB SRAM, and 41 programmable I/O pins. Operates from a 1.8 V to 5.5 V supply and integrates 18-channel 12-bit ADC, 1-channel 10-bit DAC, internal oscillator, and communication interfaces including I²C, SPI, and UART/USART. Includes brown-out detect/reset, power-on reset (POR), PWM, and watchdog timer (WDT) peripherals. Housed in a 48-pin TQFP (7 × 7 mm) package. #Microchip #AVR128DB48 #AVR128DB48IPT #AVRDB #8BitMCU #Microcontroller #128KBFlash #16KBSRAM #24MHz #ADC #DAC #I2C #SPI #UART #TQFP48 #EmbeddedSystems
4 Uses0 StarsSTM32F107RCT6
ARM® Cortex®-M3 STM32F1 Microcontroller IC 32-Bit 72MHz 256KB (256K x 8) FLASH Microcontroller with an Arm Cortex-M3 32-bit core for embedded control and connectivity applications. Operates at up to 72 MHz with 256 KB Flash memory, 64 KB SRAM, and a 2.0 V to 3.6 V supply voltage. Integrates Ethernet MAC 10/100, USB 2.0 OTG Full-Speed, 2× CAN 2.0B, 5× USART, 3× SPI, 2× I²C, 2× I²S, 2× 12-bit ADCs, and multiple 16-bit timers including PWM support. Housed in a 64-pin LQFP package. #STMicroelectronics #STM32F107RCT6 #Microcontroller #ARMCortexM3 #32BitMCU #72MHz #256KBFlash #64KBSRAM #EthernetMAC #USBOTGFS #CAN #SPI #I2C #USART #I2S #12BitADC #LQFP64
0 Uses0 Stars
