Sensors

The 532610271 is a Molex PicoBlade series wire-to-board connector header designed for compact electronic applications requiring reliable low-profile signal connections. It is a 2-position, single-row, surface-mount (SMT), right-angle header with a 1.25 mm pitch, commonly used in small consumer electronics, embedded systems, battery-powered devices, and compact PCB interconnects. This part belongs to the Molex PicoBlade (53261 series) family, which is optimized for high-density board-to-wire connections in space-constrained designs. Key Features Manufacturer: Molex Series: PicoBlade (53261 family) Connector Type: Wire-to-Board Header (Male Pins) Number of Positions: 2 pins (1×2 configuration) Pitch: 1.25 mm (high-density compact spacing) Mounting Type: Surface Mount (SMT), Right Angle Contact Type: Male blade terminals Current Rating: 1 A Voltage Rating: 125 V Operating Temperature: −40 °C to +105 °C Contact Material: Phosphor bronze Contact Plating: Tin (Sn) Flammability Rating: UL94 V-0 Package Style: Tape & Reel (for automated assembly) Typical Applications Compact consumer electronics Battery-powered devices IoT modules and embedded systems Sensor connections Portable medical or industrial devices Board-to-wire signal interconnects in tight PCB layouts #CommonPartsLibrary #Connector

LVDT Signal Conditioner IC – Converts half-bridge, 4-wire LVDT, and RVDT sensor signals into a unipolar or bipolar DC voltage proportional to position. The Analog Devices AD698AP integrates an excitation oscillator, voltage reference, synchronous demodulation, and ratiometric signal conditioning. It supports 20 Hz to 20 kHz excitation, up to 24 V RMS differential excitation, 0.05% linearity, and ±11 V output. The AD698AP is supplied in a 28-PLCC surface-mount package. #AnalogDevices #AD698AP #LVDT #SignalConditioner #PositionSensor #RVDT #SensorInterface #AnalogIC #Instrumentation

L9780 is an STMicroelectronics automotive air-fuel sensor interface PMIC for powertrain applications, integrating sensor drive, conditioning, diagnostics, and control functions in a 48-pin LQFP package. Keywords: ST L9780,L9780, air fuel sensor interface, automotive PMIC, powertrain interface, LQFP-48

Low-power high-performance 8x8 multizone Time-of-Flight sensor 940 nm, 6.4x3.0x1.75 mm, -30 to 85C

16-Bit Delta-Sigma Analog-to-Digital Converter (ADC) – Precision ADC with integrated programmable gain amplifier (PGA), voltage reference, two programmable current sources, oscillator, temperature sensor, and SPI interface. The Texas Instruments ADS1120IPWR supports two differential or four single-ended inputs, 16-bit resolution, and data rates up to 2 kSPS. It operates from a 2.3 V to 5.5 V supply, with programmable gain from 1 to 128 V/V. The device provides 50/60 Hz rejection at 20 SPS and is housed in a 16-pin TSSOP package, operating from −40°C to +125°C. #TexasInstruments #ADS1120 #ADS1120IPWR #ADC #DeltaSigmaADC #16BitADC #PGA #SPI #DataAcquisition #SensorInterface #EmbeddedSystems

6-Axis Inertial Measurement Unit (IMU) with Embedded Sensor Fusion and AI Features – Advanced motion-sensing IC combining a 3-axis digital accelerometer and 3-axis digital gyroscope, designed for wearables, TWS earbuds, smartphones, gaming devices, robotics, IoT products, motion tracking, vibration detection, and low-power embedded applications. The STMicroelectronics LSM6DSV16BXTR also includes an integrated temperature sensor and supports I²C, I3C, and SPI digital interfaces. The device features triple accelerometer and gyroscope channels, embedded sensor-fusion processing (SFLP), a Machine Learning Core (MLC), Finite State Machine (FSM), adaptive self-configuration, and Qvar sensing, enabling advanced motion classification, gesture detection, orientation tracking, power management, and AI-assisted sensor processing. Its high-performance motion-tracking mode can operate at approximately 0.6 mA, supporting always-on low-power applications. The LSM6DSV16BXTR uses a compact 14-pin LGA package measuring 2.5 × 3.0 × 0.74 mm, supports −40°C to +85°C operation, and is an active, volume-production device. #STMicroelectronics #LSM6DSV16BXTR #LSM6DSV16BX #IMU #Accelerometer #Gyroscope #MotionSensor #SensorFusion #MachineLearningCore #MLC #IoT #Wearables #TWS #Robotics #EmbeddedSystems

Digital Differential Pressure Sensor – Ultra-low differential pressure sensor designed for HVAC systems, medical devices, respiratory equipment, airflow monitoring, filter monitoring, industrial automation, environmental sensing, and embedded measurement applications. The Sensirion SDP800-500Pa features a ±500 Pa differential pressure measurement range with ±3% reading accuracy, delivering highly accurate measurements of air and non-aggressive gases. It integrates a 16-bit digital output with an I²C interface, eliminating the need for external signal conditioning while providing temperature-compensated and factory-calibrated measurements. Operates from a 3.0 V to 5.5 V supply, includes dual 5.2 mm tube ports for easy pneumatic connections, and withstands a maximum pressure of 100 kPa (14.5 PSI). Housed in a compact board-mount module, it operates over a −20°C to +85°C temperature range, making it ideal for precision airflow and pressure monitoring in embedded and industrial systems. #Sensirion #SDP800500PA #SDP800 #DifferentialPressureSensor #AirflowSensor #I2C #HVAC #MedicalDevices #IndustrialAutomation #EnvironmentalMonitoring #EmbeddedSystems #PressureSensor

Automotive multiple power supply IC designed as a system basis chip for automotive electronics, integrating a switched-mode pre-regulator, three linear regulators, and a configurable 0.8 V to 5 V microcontroller core regulator with up to 1 A buck or 750 mA linear output. It operates from a 4.5 V to 19 V supply with boost (6 V to 19 V without boost), supports a 16-bit SPI interface, includes a 4-channel wheel speed sensor interface, 10-bit ADC, configurable watchdogs, high-side pre-drivers, and is housed in a 64-pin TQFP exposed-pad package. #AutomotiveIC #PowerManagementIC #SystemBasisChip #PMIC #SPI #WheelSpeedSensor #ADC #Watchdog #TQFP64 #STMicroelectronics

Temperature Sensor Analog, Local 0°C ~ 100°C 10mV/°C 8-SOIC The LM35DM/NOPB is a precision analog temperature sensor that provides an output voltage linearly proportional to Celsius (Centigrade) temperature at 10 mV/°C. It operates from a 4 V to 30 V supply, measures temperatures from −55°C to +150°C, draws typically less than 60 µA supply current, and is housed in an 8-pin SOIC (D) package. #TemperatureSensor #AnalogSensor #PrecisionSensor #TexasInstruments #LM35 #SOIC8

Capacitive Touch Sensor Controller for projected capacitive (PCAP) touch panels, supporting up to 40 touch channels with USB, I²C, and UART host interfaces. The ILI2511 operates from a 3.3 V supply, integrates touch sensing, signal processing, and host communication in a single chip, and is housed in an 88-pin QFN package for industrial, POS, and ATM touch applications. #ILITEK #ILI2511 #CapacitiveTouchController #TouchController #PCAP #USB #I2C #UART #QFN88 #HumanMachineInterface #EmbeddedSystems #PCBLibrary