Interface ICs
An interface IC is a type of integrated circuit that is designed to facilitate communication between two devices or systems. These devices are commonly used in electronic systems to enable the transfer of data and control signals between different components or subsystems. Some common use cases for interface ICs include connecting microcontrollers to peripherals such as sensors or displays, linking multiple processors together in a network, and enabling communication between devices using different communication protocols. Flux.ai has the world's largest community-driven public library of interface ICs, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need access to accurate and up-to-date information on these important components. Whether you are working on a new design project or simply looking to learn more about interface ICs, Flux.ai is an excellent resource to help you find the information you need.
SO_IVEG600
IC HALF BRIDGE DRVR 5.5A/6A 16SO STDRIVEG600 single-chip half-bridge gate driver for enhancement-mode GaN FETs and N-channel power MOSFETs, high-side voltage up to 600V, suitable for bus voltages up to 500V, designed for high-speed GaN and Si FET driving, high current capability, short propagation delay, supply voltage down to 5V, UVLO protection on high-side and low-side sections, interlocking function to prevent cross-conduction, 3.3V CMOS/TTL compatible logic inputs for MCU/DSP interface.
0 Uses0 Stars77313-118-22LF
Connector Header Through Hole 22 position 0.100" (2.54mm) Pin Header 02x22 2.54mm Vertical The 77313-118-22LF is a 2.54 mm pitch unshrouded vertical pin header connector from the Amphenol ICC (FCI) BergStik® series. It is designed for board-to-board and wire-to-board interconnections in embedded systems, industrial electronics, prototyping, and general PCB applications. The connector features a double-row, 22-position through-hole configuration with gold-plated phosphor bronze contacts for reliable electrical performance and durability. Key Features 22-position dual-row header 2.54 mm (0.100") pitch Vertical through-hole mounting Unshrouded male pin header BergStik® series Gold-plated contacts for improved conductivity and corrosion resistance Phosphor bronze contacts with thermoplastic housing Current rating: up to 3 A per contact Operating temperature: −65°C to +130°C UL94 V-0 flame-rated housing RoHS compliant Suitable for: MCU and development boards Mezzanine board stacking Ribbon cable interfaces General-purpose PCB interconnects #CommonPartsLibrary #Connector #Header
6 Uses0 StarsBME690
Gas, Humidity, Pressure, Temperature Sensor Digital Output The BME690 is a compact 4-in-1 environmental sensor from Bosch Sensortec designed for advanced indoor air-quality monitoring. It integrates gas, humidity, temperature, and barometric pressure sensing into a single low-power MEMS device. The sensor is optimized for battery-powered and high-condensation environments, making it suitable for smart home, industrial, wearable, and IoT applications. Key Features 4-in-1 environmental sensing: Gas sensing Relative humidity Temperature Barometric pressure Detects: Volatile Organic Compounds (VOCs) Volatile Sulfur Compounds (VSCs) Other air-quality-related gases Supports indoor air quality (IAQ) monitoring Provides: IAQ index bVOC equivalent CO₂ equivalent outputs Improved robustness for high-condensation environments Ultra-small package: 3.0 × 3.0 × 0.93 mm 8-pin metal LGA package Low power consumption suitable for battery-powered devices Interfaces: I²C up to 3.4 MHz SPI up to 10 MHz Wide operating range: Temperature: −40°C to +85°C Humidity: 0–100% RH Pressure: 300–1100 hPa Supply voltage: VDDIO: 1.2 V to 3.6 V VDD: 1.71 V to 3.6 V Humidity accuracy: ±3% RH Temperature accuracy: ±0.5°C Pressure accuracy: ±0.5 hPa absolute Supports AI-based gas classification using Bosch BME AI-Studio Pin-compatible evolution of the BME688 platform Designed for: Smart home devices HVAC systems Air-quality mapping Food freshness monitoring Wearables Industrial sensing applications #CommonPartsLibrary #Sensor
11 Uses0 StarsSMAJ33A-13-F
53.3V Clamp 7.5A Ipp Tvs Diode Surface Mount SMA TVS diode SMA 33V The SMAJ33A-13-F is a surface-mount transient voltage suppression (TVS) diode designed to protect sensitive electronic components from voltage spikes and transient events. It is typically used in circuits exposed to electrostatic discharge, inductive load switching, and other transient voltage conditions. The device operates by clamping excessive voltage to a safe level, thereby preventing damage to downstream components. Its compact surface-mount package enables efficient use of board space while maintaining reliable thermal and electrical performance. Device Overview This component is constructed using silicon avalanche technology, providing fast response time to transient events. It is intended for use in high-reliability applications where overvoltage protection is critical. The unidirectional configuration ensures effective suppression in circuits with a defined polarity. The device is optimized for low leakage current under normal operating conditions and high surge capability during transient events. Electrical Characteristics The diode is designed to operate with a defined stand-off voltage, ensuring it remains non-conductive during normal system operation. Upon exceeding the breakdown threshold, the device transitions into conduction, clamping the voltage to a specified level. It supports high peak pulse power dissipation and is capable of handling repeated transient events without significant degradation. Mechanical and Packaging Information The device is provided in a compact surface-mount package suitable for automated assembly processes. The package is designed for efficient heat dissipation and mechanical robustness, supporting standard reflow soldering techniques. Terminal finishes are compatible with common PCB manufacturing processes and ensure reliable solder joints. Applications Suitable for use in consumer electronics, industrial control systems, telecommunications equipment, and automotive electronics where protection against voltage transients is required. Common use cases include power supply lines, data lines, and interface ports. Environmental and Reliability Considerations The component is designed to meet standard environmental and reliability requirements for electronic components. It is suitable for operation across a wide temperature range and is built to withstand typical handling and assembly stresses. #commonpartslibrary #circuitprotection #tvsdiode
225 Uses0 StarsEFR32ZG23B020F512IM48-B
IC RF TxRx + MCU General ISM < 1GHz Z-Wave® 863MHz ~ 870MHz, 902MHz ~ 928MHz 48-VFQFN Exposed Pad The Silicon Labs EFR32ZG23B020F512IM48-B is a 2.4 GHz–independent (sub-GHz) RF Tx/Rx + MCU SoC optimized for Z-Wave smart home and IoT mesh networks. It integrates computing, RF communication, and security features in a compact 48-pin QFN package. It is part of the EFR32ZG23 Series 2 platform, which focuses on low-power, secure, long-range wireless connectivity for smart home, building automation, and industrial IoT devices. Key Features MCU Core & Memory ARM Cortex-M33 core (up to ~80 MHz) 512 kB Flash memory 64 kB RAM RF / Wireless Z-Wave protocol support (mesh + long-range) Frequency bands: 863–870 MHz (EU) 902–928 MHz (US) Max data rate: up to 100 kbps Output power: up to +20 dBm High sensitivity: around –110 dBm Security Secure Vault™ high-level security subsystem Hardware cryptography support Secure boot and key protection (IoT-grade security) Low Power Performance Ultra-low receive and transmit currents (single-digit mA RX, tens of mA TX) Designed for battery-powered IoT nodes Peripherals & Interfaces GPIO (up to ~31 pins depending on variant) ADC, I2C, SPI, UART, I2S, IrDA Flexible digital/analog peripheral integration Package & Electrical 48-pin QFN (6 × 6 mm) Supply voltage: 1.71 V – 3.8 V Industrial temperature range: –40°C to +125°C #CommonPartsLibrary #IntegratedCircuit #RF-transceiver #EFR32ZG23B020
0 Uses0 Stars
