Top Organization Projects

(AL8805W5) The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be reduced by either presenting an analog voltage or a PWM signal to the board. Version 12 of the board adds a solderable jumper that can be closed to increase the maximum current to 660mA. The new voltage regulator also increased the voltage rating on the various components on the board, allowing it to be used up to the full 36V rating of the AL8805 part.

The METRO Mini works great with the Arduino IDE, and runs the ATmega328P at 16MHz so it is pin-compatible with Arduino UNO R3, you can use this with the Arduino IDE (both desktop and cloud version) by selecting 'Arduino UNO' in the Boards menu.

This is one of the simplest FM transmitters that can be built. It does not require any tuning, and transmit frequency is crystal locked to 90MHz. It eliminates frequency drift common to LC-based FM transmitters. This design is best suited for broadcasting voice or music up to a distance of fifty metres depending on the antenna used.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Mosfet Array 2 N-Channel (Dual) Common Drain 20V 4.2A 980mW Surface Mount SOT-23-6

N-Channel Ehancement Mode Reverse Protected Power MOSFET Symbol

The Arduino Nano 33 BLE is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM® Cortex™-M4 CPU running at 64 MHz.

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Arduino combination with various headers and connections, eliminating the need to stack multiple shields.

HC05 Bluetooth RF Grove Platform Evaluation Expansion Board

series RF Receiver GPS 1.575GHz -161dBm - - Module

High Performance USB SDR ADS-B Receivers

An active component that decreases resistance with respect to receiving luminosity on the component's sensitive surface.

A digital logic gate that gives an output of 0 when any of its inputs are 1, otherwise 1.

Welcome to your new project. Imagine what you can build here.

DST-1R4P-N 24vdc to 3.3vdc opti-coupler for use with Raspberry-pi and other 3.3v input microprocessors.

The SparkFun RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and Ardiuno combination with various headers and connections, eliminating the need to stack multiple shields.

The nRF52840 DK is a versatile single board development kit for Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary applications on the nRF52840 SoC. It also supports development for the nRF52811 SoC.

Adafruit 4776 NeoPixel Mini Button.

Welcome to your new project. Imagine what you can build here.

WS2812b 12 LED sized strip

Adafruit NeoPixel RGBW Mini Button

A preliminary design for developing SMT32F4x series based project that’ll help you get started faster.