This project is a LoRa to WiFi Gateway using an ESP32 microcontroller. The design incorporates a LoRa transceiver and a WiFi module to facilitate data transfer between LoRa and WiFi protocols. This gateway can be directly implemented in IoT-based applications where field devices using LoRa need to communicate with WiFi-enabled devices. #referenceDesign #project #ESP32 #LoRa #lora #hub #gateway #ESP32WROOM #RF #WIFI #MCU #reusable #module #edge-computing #espressif #seeed #seeed-technology #sublayout

This project is a Smart Thermostat design using an ESP32 module for WiFi connectivity and a BME680 sensor for environmental monitoring. The user interface includes an E-ink display and an encoder for settings adjustment. Power is managed through a USB-C connector with a 3.3V regulator. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #reusable #module #edge-computing #edgeComputing #espressif #sublayout

This project is a reference design for an ESP32-S2-MINI-2 based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for an ESP32-S2-MINI-1U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for an ESP32-S2-MINI-2U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This is a stereo WiFi camera reference design using dual ESP32-CAM modules for edge computing. The design includes connections for power, ground, and core communication features; UART for control & data transfer, and BOOT pins for mode selection. #WiFi #MCU #stereo #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

This project is a reference design for an ESP32-MINI-1U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32MINI #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a of ESP32-S3-MINI-1. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes user RGB LED #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

Dual core, Wi-Fi: 2.4 GHz up to 150 Mbits/s,BLE (Bluetooth Low Energy) and legacy Bluetooth, 32 bits, Up to 240 MHz #esp32 #ble #wifi #arm

This is a ESP32-C6-MINI-1 rmodule built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #reusable #module #simple-embedded #espressif #sublayout

ADS1115 series 16 Bit 860 Samples per Second Analog to Digital Converter (ADC) Evaluation Board Adafruit 1085 ADS1115 Adafruit 4-Channel ADC Breakout based on Texas Instruments ADS1115 (16-bit) or ADS1015 (12-bit) analog-to-digital converter, featuring I2C communication, four single-ended inputs or two differential inputs, programmable gain amplifier (PGA) up to x16, internal voltage reference, programmable comparator, and selectable I2C addresses (0x48–0x4B). Operates from 2.0V to 5.5V and supports interfacing analog sensors with 3.3V and 5V microcontrollers such as Arduino, ESP32, STM32, RP2040, and Raspberry Pi. Search Keywords: Adafruit 4-Channel ADC Breakout, ADS1115 Breakout, ADS1015 Breakout, Adafruit ADS1115, Adafruit ADS1015, I2C ADC Module, 16-bit ADC, 12-bit ADC, 4-channel ADC, differential ADC, programmable gain amplifier, PGA ADC, analog sensor interface, TI ADS1115, TI ADS1015, Raspberry Pi ADC, Arduino ADC module, ESP32 ADC expansion Hashtags: #Adafruit #ADS1115 #ADS1015 #ADCModule #I2CADC #16BitADC #12BitADC #AnalogToDigitalConverter #SensorInterface #DifferentialADC #PGA #Arduino #ESP32 #STM32 #RP2040 #RaspberryPi #DataAcquisition #EmbeddedSystems #AdafruitBreakout

This is a ESP32-C6-WROOM-1U module built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #reusable #module #simple-embedded #espressif #sublayout

This is a BLE to WiFi gateway module. It employs an ESP32 microcontroller and an STM32WB5MMGH6TR for BLE functionality. The design includes connectors, multiple capacitors, resistors, switches, and LEDs. USB Type-C is used for power and data. This could be used for IoT purposes in home automation or wireless sensor data transmission. #reusable #module #edge-computing #espressif #stm #ble #sublayout

This is a ESP8684-MINI-1U Module for easy and fast design. The minimum necessary for development is stored on the board. There is USB C with CH340 for firmware, EN, and BOOT buttons #IoT #WiFi #MCU #RF #ESP32 #reusable #module #simple-embedded #espressif #sublayout

802.11 b/g/n Wi­Fi and Bluetooth 5 module, ESP32­C3 SoC, RISC­V microprocessor, On-board antenna esp32 espressif WiFi Bluetooth LE ESP32?C3*WROOM?02U*

Classic IoT Dev Board based on ESP32 + SX127x, it has Wi-Fi, BLE, LoRa functions, also Li-Po battery management system, 0.96″ OLED are also included.

Super tiny ESP32-C3 board #Module #ESP32

This is a WiFi relay board based on ESP32-H2 WiFi module. It have AC-DC power supply with output 12V and relay for controlling voltage #esp32 #project #Relay #wifi #esp32-h2 #iot #template

Proyecto control humedad y temperatura con esp32

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template

ESP32 Sublayout with USB.

Specially designed for IoT ESP-WROOM-32E-based main controller board with dual-core chips. #ESP32 #ESP32WROOM #RF #WIFI #MCU